software

I had never had much use for the upper frets since I’m not a great lead player. But, now that I have installed a Texas Hot neck that makes those upper notes sound great, I realize that the upper frets on my JV aren’t really easy to get to. When I am sitting down it’s workable, but standing is more difficult.

Guys,

I'd like an amp that's all-tube, with two channels, usable clean, rockin' distortion, seperate EQ on those channels, 30-60watts, combo or head doesn't matter...I'm lookin for a more diverse or maybe just better-sounding step-up from my Bassman.

Ellis Guitars of Australia has made what's missing in the shops. Stomp Boxes! Those things you tap your foot on and they boom like a bass drum whilst you are playing solo!

Hi there, The middle pup of my ibanez may need a pup upgrade in the future, just wondering what to change it for?
I was thinking about a cool rails, but isnt this really a humbucker? Does this have 5 wiring or 2 , if so which colours (wires), and finally are all hum cancelling single coils 5 wire? The reason i ask this is because i dont want to have to do a really technical job (by my standards lol) and have to install a humbucker in place of a single coil... unless of course its easy lol!

Anyone have a good RG ibanez fixed bridge body they want to sell or trade? I'd want one made in japan! It must have the AANJ.. (All access neck joint) in order to work with my neck..
Thanks so much

Man, what a CS department! I requested a catalog at 9:30 on April 24, it showed up today, and was postmarked the 25th. There's even a pick taped to the front!

Hopefully it kicks ass!

Hello all, listen, I'm new to this whole guitar painting business. I got an older schecter (A-1) and I sanded all the paint off with 120 grit sandpaper. I'm gettin the color and clear coats applied professionally, but I have to prome it myself. My question is, what primer do i use, and where do I get it (i would prefer to use an aerosol if possible) any advice a big help.

hey folks

So I've had my paul for a while, and have the thing adjusted all the way down. Seems logical that this would be the best position for more sustain/resonance whatever, but I've heard some information stating otherwise.

Other than Ibanez and some of the Fender's, who makes some or all of their guitars in Japan? I've found that as a general rule, (but not always), Japanese made guitars are perhaps a little bit better, or at least more consistent with their quality than Korea or China. I own 1 Japanese Ibanez now, and just got lucky finding a brand new Japanese made Charvel Traditional from AMS, which I should have tomorrow. I'm now on the lookout for other Japanese made stuff. Any help?

Anyone have experience with this amp? How does it compare to the Legacy? I love the idea of three channels. I know sight unseen the clean tones are killer - just because all Carvin tube amps have unbelievable clean tones.

I have a 97 american standard strat that came factory wired with a jumper between the middle and bridge positions on the 5 way coming from the lower tone pot. With my standard bridge pickup and the factory wiring, I had bridge tone control but nothing on the middle pu. I should also note that the tone pot looks a little different and has a notch type of feel once it winds to 10.

I recently purchased a Fender Precision Bass. I'm new to the world of bass strings. D'adarrio makes bass strings in short, mediium, long and super long scales. This particular P-Bass has the strings running through the back of the Bass. Which scale size should I use?

Hi Guys!

Posts for a tune-o-matic bridge. A bridge was slightly off kilter and posts weren't seated all the way down to the body. I tapped them in a little with a hammer until they were almost flush. One side of them pushed in a little more than the other and in the light you can see where the finish is pushed in a little bit and buckled slightly. Will this cause the poly coat to crack eventually at that spot? I'm assuming it's not all that flexible. It's a fairly thick glossy coat.

I don't rely on a whammy bridge but it's nice to have. I'm accustomed to a floyd but I've found that when I owned one I didn't use it that much.

H2O in mint or near mint condition. $110 shipped amp; insured in the contiguous US.

Was listening to one or two of my own MP3s from a year or two ago... I kinda digged this one. Played using a PRS McCarty Soapbar into a 64 Vibroverb Reissue, recorded with an SM57 in a little Boss 4 track recorder. Lyrics completely ad-libed.