software

See if you can guess what was used on this recording;
Particularly what was used on the guitar solo; and how this was recorded for that matter.

If anyone has one they want to get rid of let me know maybe we can work something out. Looking for the head version but will also consider a combo.

Hey Im Modifying one strat I have... putting jumbo frets and I wanna change pickups... I decided on a Hot Rails Neck. Thinking about ttrying the Custom 5 or the Original Parallel Axis Trembucker in my guitar.. cause I dont want a bright pickup in bridge. Im going to use them like this : Clean sounds neck or middle; Dirty Rhythm Bridge; Solos : Alternating between neck and bridge.
Questions :

One is a mahogany guitar, the other is an alder guitar....can you tell the difference?

Hello all,

Here's the deal. Right now I have a Laney AOR30. It's a good amp but it needs new tubes BAD. They're totally shot. The cost of the retubing plus biasing probably would be around 70 pounds. Because the amp is so big in size, I can't bring it to band practises, or move it around. So all I do with it now is use its effects loop for the POD.

Very little of the stuff, on the outside of an (off brand) active pickup.

Has anybody else gotten their 50 th`s in yet? Have`nt installed mine but they ought to sound really sweet ! Made from Seymour`s private stash he acquired form Seth`s estate, rumour has it. I don`t think there will be many sets of these and I feel very lucky to have gotten some. Real cool engraving on the covers and a special serial numbering. Mine are number 6. MJ and the Custom Shop really rocks !!!

I just put an alnico magnet in the DD I have, trying to make it a JB (I got sick of the mids in the DD mixed with alder). Since it's bright silver (the magnet), I know it's alnico, but I'm not sure if it's an A5 or A2. The magnet came out of a 73 Gibson LP stock bucker. Anyone know?

I can hardly wait to drop them in my LP Studio. I was able to order them with gold covers too! I'm looking forward to the new tone they're going to bring to this guitar. Will there be a huge difference compared to the 490R amp; 498T that are in there now? What can expect?

Ok guys, i've got big problems making this biatch of a breed work with my old single coil in what i think is phase.

Ok, so, with all the rain and storming lately here in SoCal, I was inspired to make something fitting for the weather.

well, the tex mex ones are pretty cool, but they leave me wanting something more

ok i am buying a 8-track digital recorder and some mics....my question is for my Condenser mics....do i need to purchase phantom power for them or can i just plug them right into the recorder and use them? the mics i plan on getting are MXL990 and MXL991... if neone could help me out i would be very greatful..

When I used to take guitar lessons I used an old Yamaha with 1 humbucker and 2 single coils. To tap the humbucker it had a push pull pot, but instead of pulling it for the out position, you would push it and it would pop out. Does anyone know where I could buy a pot like this? I used to have a regular push-pull pot and it's not as convienent.

i put a pickup cover on my Jb bridge to match my neck pickup and now i'm having a harder time getting good feedback... usually it takes a while to start and then it just squeels... is this something i can fix or should i just take it off? also i'm starting to not like the Jb... it's a little too smooth. what should i get to have a more raw sound that will really drive my marshall?

I just replaced the saddles on my Kramer 450G. I had an old Tele bridge I forgot I had and switched out the tired rusty old saddles. These are really close to the original 450G saddles. I adjusted the hieghts (something I was never able to do before) and intonation (ha! after 27 years and with no truss rod the intonation is spot on. Hardly any adjustment needed. Gotta love aluminum necks.) and everthing was grand. I picked up the guitar today and a bunch of the saddle height adjustment screws moved. This is something I have never encountered before. Some of the height screws stick up a good 1/8quot;, I am going to grind them down. I figure it's probably my hand moving them when I palm mute, I just figured there would be more than enough tension on the saddles from the strings. I may not have noticed it because the aluminum expands with hand warmth and I have to retune a couple of times until the neck warms up. Anyone had trouble with Tele or Strat saddles moving on their own?

Hey all. It came out of a Gibson Sonex 180 deluxe. Thats what it says on the baseplate, the guys at the shop told me its a Dirty Fingers, but i'm not conviced. It doesn't seem hot enough.

Does anyone know what this would sound like?