software

Guys this thing sounds horrible. JB bridge, 4 wire Duckbucker mid and Vintage rails neck. It was wired using the Megaswitch diagram found here .

I used a 500k cts audio volume and a cts 500k linear tone with a .022 cap.

The JB is very bright and both the neck and mid are dull and lack volume. Do I have the wrong pots in it? Same config as before but with dimarzio pups and they had 500k's in there.

Help me please

I'm not seeing a schematic with everything in it. First question though is did you solder/tape the red and white together?

Luke


Originally Posted by Luke DukeI'm not seeing a schematic with everything in it. First question though is did you solder/tape the red and white together?

Luke

That's all you get for schematics with there switch. The switch is numbered so it's hard to screw up. I was using a fender fender 5-way and a schematic found here but it sounded even worse. BTW one tone and one volume with splits(shown at link above)

Yes both the JB and the Duck have the red and white wire soldered together.