from : localhost/just read on this web page that the early Esquire
had a hole in place of the neck pickup under the pickguard.
I thought the whole point of having only one pickup was to have
more wood, thus better resonance?!?!?!?

software 發表在 痞客邦 留言(0) 人氣()

Ok so i just put in a brand new F spaced breed in my strat and look at the pole to string alignment...
i know it's f spaced b/c it was A) in a sealed box with a big F spaced sticker on it and B) it lines up with my f spaced tone zone i had sitting around. i don't get why the strings/poles don't line up.
any ideas why it's doing this with an f-spaced PU? if it was regular spaced i know it would do it, but why with the F? is the string spread on my strat just abnormal...lol.

software 發表在 痞客邦 留言(0) 人氣()

If you had to choose a pup to emulate a saxophone which would it be?
I'd get a Roland Synth pickup and synthesizer. If you're just wanting to emulate sax on guitar, I'd use a low to mid output pickup, like a '59 or Pearly Gates and boost it with a pedal (just a slight overdrive to create some breakup), maybe something like DOD's Mystic Blues or something similar.

software 發表在 痞客邦 留言(0) 人氣()

Are the Duncan 59's more noisey then some of the other Duncan humbuckers out there? Mine seems to have some interference or noise that does not happen with my other guitars. And yes the guitar is sheilded and the wireing is 100% correct, which was double checked by a local pro tech...
WhoFan
They're humbuckers, they shouldn't be making any noises at all if they were installed correctly....none of mine do.

software 發表在 痞客邦 留言(0) 人氣()

all right, i've saved up enough to get either one of these two
i've done a search here and the XT seems to be awesome, but i can't seem to find which of the two versions would suit be better
im mainly going to use it for home recording...

software 發表在 痞客邦 留言(0) 人氣()

Right hand.
$500 shipped in the lower 48. Guitar is roughly 3 months old, like new. Nice padded gigbag included.
Pics

software 發表在 痞客邦 留言(0) 人氣()

Hi all, this is my first time post, so I hope I'm not asking a question that has already been answered (I did search first).
Has anybody simulated a guitar pickup in a SPICE circuit simulator (PSpice, SuperSpice, etc)? I particular I'm wondering how you modeled the source.
Currently I'm using a voltage source with a series resistance and inductance. (Currently about 30mV with a 8k Resistor and 3H Inductor). This seems to be the common method I've found on the web, but someone suggested using a current source instead.

software 發表在 痞客邦 留言(0) 人氣()

Where can I find some low impedence guitar pickups?
I was reading about les paul and it said he was using low impedece guitar pickups and going direct to board with them. I was thinking about experimenting with somthing similar.
basically i want a pickup that will give me a crystal clean clear sound for going straight in for recording and something that is fairly flat.

software 發表在 痞客邦 留言(0) 人氣()

OK, so imagine this:
You have 2 absolutely identical acoustic guitars. One has the best onboard pickup system available, and the other is amplified through the best external pickup available.
Which is likely to have the best tone, and why?

software 發表在 痞客邦 留言(0) 人氣()

this guys amp sounds alot like the VH brown sound!
i was listening to this guys clips on this site and they are really good for a solid state.
the amp is a Crate GFX 212 SS.

software 發表在 痞客邦 留言(0) 人氣()

Hello everyone,
I've been lurking as a guest for the last couple weeks and got so much great info decided to join in.
For 2 yrs. I've been playing a Epi LP Black Beauty (3 HB) with a Kent Armstrong Hot Rod Vintage in the bridge, a KA P90 in the middle, and a KA Vintage PAF in the neck. The guitar is wired to split both bamp;n pups to single coil, and alternate which coils sound (outer or inner).
While I've gotten some nice tones out of this setup, one thing has always bothered me...too much low end I can adjust it out with Eq OK, but finally decided to take the plunge and try some different pups.
After hours of reading your posts, i decided to try the Aph-1 in the neck. I think the Vintage at 8.9k was causing alot of the muddiness, and was shocked to hear what my neck pup COULD be sounding like. For the bridge, I hovered over the C,CC and C5 for quite awhile, but finally decided to try the PG. I'm hoping the extra bit of treble will counter the dark tone of the guitar.

software 發表在 痞客邦 留言(0) 人氣()

I have these speakers already so cost is not an issue. Or any other suggestions would be welcomed with open arms! The amp is a custom made 59 Bassman circuit inside a tweed 2-12 cab. I'm having the original transformers replaced with Mercury's and the caps with Sozo's so it SHOULD sound great. Okay, here are the speakers I have already.
Two Vintage 30's, two G12H30's or one of each?
I already have a 4x12 with 2v's on the bottom and two g's on the top and it made my Crate Blue Voodoo sound like a completely different, and much higher quality amp than it's reputation. Don't know if they will do the same for a Fender though.

software 發表在 痞客邦 留言(0) 人氣()

Blog Stats
⚠️

成人內容提醒

本部落格內容僅限年滿十八歲者瀏覽。
若您未滿十八歲,請立即離開。

已滿十八歲者,亦請勿將內容提供給未成年人士。