software

I have a USA BC Rich Bich Suprem with an SH-2 in the neck and an SH-5 in the bridge. I have bypassed all the active electronics in the Bich and have just a standard wiring as per your wiring diagram for 2 Hum, 2 Vol, 1 tone and a 3-way. The problem I am having is that while initially everything works fine after about 10-15 mins of playin the volume on the bridge pickup cuts out almost completely as if I had just turned the volume knob almost completely down. If I then unsolder the switch and resolder it, it's fine for another 10 mins or so. I have tried using the other side of the switch, different pots bypassing the tone and resoldering all the connections. No matter what I do the problem constantly returns. At the same time this is happening there is no effect what so ever to the volume level of the neck pickup. As an aside I have the same exact problem with the same exact set up in a USA BC Rich Mockingbird. I have no idea what to do now. Its almost like the capacitor is storing a charge and then sucking the power away from the humbucker but if that were the case it would seem to me that the bridge pickup would be affected too, but it is not. As far as I can see i have everything wried properly according to your diagram. The only difference is that instead of the 500K tone pots and .47 capacitor I have the factory 250K pots with .23 capacitor. Any ideas?

Looking for overdrives, trem spaced buckers, or trades cash...

okay i got a new jackson and it came stock with emg hz, which i hate. So i dont wanna spend so much money so im just gonna change the b pup. which pup would sound better? Dimebucker or Invader

Does your distortion sound thin and rough ? I don't seem to be able to get any good distorted sounds from mine. Issit time to replace the tubes or something?

does the best job of flatening out a belly on a flattop? My beloved Sears Roebuck acoustic has a pot belly bigger than mine. So, who's good at it?

I am loving it!!!!!!Nice!

Basically this is it:
Bone Vs. Brass Vs. Graphite.

Question see title.
Since here on the forum there are so many great craftsmen and i want my Jackson DXMg to have a little more class( it plays great but the solid black finish is just somehow dull) i thought i could ask you guys if it's possible to build something like this?to fit a guitar like this: Lo-Pro Jackson Floyd, HH, Master Volume - Master Tone

Title says it all...I want an Electro Harmonix Memory Man. I would also look at a Line 6 Delay Modeler or even a Dano quot;Reel Echoquot;. PM me if you have one of these or anything else that I might like!

why do people mod their tubescreamers? what is wrong with them in the first place?