software

Here's 2 qwick clips . I didn't dial in the sweet spot yet and I got a cold
solder joint gremlin somewhere in the circuit to be fixed. I used a Strat
w/t a APS-1 neck and lil' 59er bridge into my Champ 12. So far i'm very
impressed with this pedal. I think it sounds about as close as you can
get to a cranked Marshall with Transistors. NOTE: The buzzing sound
your hearing is from the bad recording NOT the pedal!!Strat APS- Neck- Champ 12

Strat -Lil'59er bridge-Champ 12

SOunds like one useful pedal Don't know how you recorded (although it seems like the lineout cable to the pc method), but you should crank down the volume a bit because it seems the signal is too strong for the recording device.


Originally Posted by KommerzbassistSOunds like one useful pedal Don't know how you recorded (although it seems like the lineout cable to the pc method), but you should crank down the volume a bit because it seems the signal is too strong for the recording device.

Sorry about the levels being to hot. I had to do it in a hurry.
but here's 2 more from the same session.
Eagle
My EVH chops need work!

Once again it sounds like a very very good dist.
Man I gotta make mine soon