software

How much differnce should be heard between 1 amp; 2, using single coil P/U, I can hear a slight difference at 2 (less highs) but cannot hear any difference at 1. Is the change supposed to be nominal or should it be noticable? the boost at 0 works fine (I had a previous post with a problem that apprears to be gone), thanks

The difference between 0 and 1 should be significant. Switching to 2 should be even more of the same. Somewhere around here is a post by Evan, where he states that the guitar needs to be plugged directly into the booster for the resonance switch to be effective.

Do you have anything plugged in between the guitar and booster?
Just a thought.

I just did a quick check on mine. The difference between 0 and 1 isn't quite as great as I remembered. But I also noticed something else. I've been using mine alot lately, and the battery was weak. So I replaced it. That makes a bit of a difference. Also, there's less difference with a humbucker than a single coil.

So . . . maximum affect comes from a single-coil, with a strong battery. But even then, the difference is somewhat subtle. Should be a big difference going to quot;2quot; however.

The guitar is going direct into the booster, with a direct power source. I difference is nominal either way (0-1, 0-2)

Hmmm . . . the difference won't be huge, but it should be noticeable.

Any chance you could post a clip?