software

I've just got a new MXR Distortion pedal and I'm not sure about where to put it in my setup, and I'm afraid of damaging it. Should it be:

Forgive a dumb question...I'm trying to decide on replacement pickups but I have a basic question. Would you consider a mahogany/maple cap body with a bolt on maple / rosewood neck to be a balanced sounding guitar? It has a fixed bridge..a wrap around tune-o-matic / stop tail piece all in one type thing.

hi guys,

with all the new tube amps and the tube tone craze, dont you guys think that tubes are making a considerable comeback? Could it be that GE and RCA will start making 6l6's again in the near future?

Ok so I see a lot of you guys post and say

Just figured I'd see if anyone here wants them before they go on ebay.

I have a TSL 100 Head that is making some crazy noises when the reverb is on. It sounds like you can hear the springs vibrating through the speakers. If you tap the amp, or have a nearby bass, or kick it you can hear sounds like springs rattling around coming out of the speakers. The amp sounds fine when the reverb is off. It took a fall when the 1/2 stack was tipped over a couple months ago. I did a complete JJ retube, and replaced the stock 2 spring tank with an Accutronics 3 spring long dwell, and it made no difference. I could find no physical damage inside the amp, and no loose connections. Any thoughts, or ideas here would be greatly appriciated. You can email me:
ricky_kodadek@yahoo.com

Does anyone know if the Legacy and S-500 models will take a replacement pickguard? The Trem looks like it might take a pickguard that is shaped slightly different from that of a strat....

Last night I decided to swap the bridge pickup in my American Series Telecaster with a Jerry Donahue model.

My Hwy1 Tele makes unwanted rattling/buzzing sounds when I play it, even when it isn't amplified. Therefore, I guess it's the guitar (I hope sincerely that it isn't the amp, which is an old Vox AC30TB).