software

Hey guys, I just noticed that those Framus CS 212 cabs go for about 300€ and they're loaded with Vintage 30s... which seems to be a real steal... anyone ever played them before?

I'm looking for a small modeling amp for practice/home recording, 30-50 watts, maybe a 10quot; or 12quot; speaker. I've tried the line6 spider2 30 and the peavey 110 EFX. Either would do the trick, but in my town, there is not much to choose from. I would have to go to musiciansfriend. Are there any amps I might be missing that would be better than these two?
Any input would be appreciated

I posted in the tips and clips but so many more people go here that I thought this would be a good idea. I would like to hear an Antiquity II Surfer in the neck. I'm planning on putting one in a tele along with a JD in the bridge.
Thanks.

maple/maple, medium jumbo stainless steel frets, earvana nut, frets in good shape, a few marks, nothing into the wood itself...i got this neck from Brisk about a year ago...i was saving it for my quot;TeleHossquot; project and had started to try and trade it for a bigger neck...after all...i usually play bass and this is a wizard neck...but...such as things can be in life...i just need to sell it!

ok so like how do i use a Stereo jack ( one with 3 lugs ) as a mono one ? ( one with 2 lugs ) i dont have any mono jacks but i have a stereo jack and im just curious how to wire this up ? do i just need to stick a wire across some terminals ? or is it a no go ?

Well little less than a week ago I bought a full shread humbucker. Problem now is i cant find the right schematics to install it properly ( where to solder each wire) If anyone could help that would be great. I have a epiphone sg special and trying to put the bridge pickup in.

from : localhost/abstractlogix.com/

On ebay right now, Line 6 HD147, new, started at $600. Misc. Guitar tab/sheet music books. Over the next few days will be added: DOD grunge effects, Danelectro Fish amp; Chips eq pedal, Black Coffee Black Licorice distortion pedals Ibanez Limited Edition guitar with Spawn graphic.

Hi guys.. I have a DD trem bucker / f spaced .. I stuck in my RG 550 with maple neck and trem.. it sounds good, but I want to try my newly aquired Dimarzio Tone Zone which I think just sounds better in these guitars.. since Dimarzio and Ibanez seemed to be joined at the hip.. hehe.. Anyway, I had thought that I might like to try the Distortion in the neck since I thought it was too bright in the bridge anyway, but the output was too high and it would drown out the Tone Zone I was afraid, so I'm thinking if I could write it to be single coil all the time in the neck, it would be almost perfect. I don't want to ahve to use a coil splitter device thought like a volume knob or such.. Can someone hlep me write this? OR tell me how?

Ok, I'm going deaf playing through my 100 watt head. I'm thinking of pulling 2 power tubes to cut the power in half and save whats left of my hearing. I wish to get the sound, tone and breakup I get when I crank it beyond 7, but at a lower volume. I know alot of you fellow members have done this to your rigs already and I wish to hear your experiences good and bad.