software

This weekend I'm going to be wiring two humbuckers in my Strat. The Blues Saraceno in the bridge and the Jazz model in the neck. 1 volume, 1 tone and a 5-way switch as per the schematic in the SD support section. The wiring will give me following selections:

1) Bridge
2) Bridge and neck
3) Neck
4) Bridge w/neck split
5) Bridge split

This all sounds fine except for the 5th position (bridge split). Using the standard 5-way lever switch can I instead wire it up where the 5th position will be NECK split as opposed to bridge split? If so could anyone provide me with a schematic so I could see what's involved? Thanks for your time.

There would be a way to get neck split, most likely, but I don't think it could be done without the other positions changing...