software

from : localhost/s49.yousendit.com/d.aspx?id=1...N053GMZILFWWFD

I just bought a brand new 59 neck and a used JBJ for my import Hamer. My question is, do I just follow the standard quot;2 humbucker, 2 volume, 1 tone, 3-way switchquot; diagram and solder 2 of the JB wires together?
Or is there a different configuration for the 2 conductor and 4 conductor pickups?

What would you choose? Give me the pro's and cons gentlemen.

All I know about it is it is in fact a pickup. At least it better be.

What is this p/up like?
is it similar to a c-5?

good day, my jackson ps2 (h-s-s) has a dimarzio evolution at the bridge and I was thinking of putting an shr-1 hotrails neck pickup. is this gonna be a good match in terms of output level between the 2? my current neck pickup, a no-name single coil sized humbucker, drops a lot of volume when I switch from the bridge to the neck pickup and it's annoying as hell during live situations. thanx!

does anyone know how to fix the problem of an unfinished leather guitar strap pulling my shirt all over the place when I'm playing? is there some kind of oil or something you could put on it or something?
Thanks

I've got a marshall 1961B 2X12 cab up for sale, its in Good minus condition or so (not sure how to describe it, few small tears in the tolex and looks a little older, but no big gashes or tears).

What ohmage of speakers would I use and what wiring configuration would I use to get a 2x12 cab rated at 16 ohms?

from : localhost/music.aol.com/artist/main.adp...amp;artistid=3879

You guys helped me decide on a Duncan pick up booster over a GE-7 equalizer, now help me decide on an overdrive. I already have a TS-9, but I'm thinking about trading it for a Voodoo Labs sparkle drive. I played one yesterday, and it was quite sweet with the clean blend, but I did'nt A/B that with the tube screamer. Which one do you think is better?

Has anyone tried cutting magnets in half lengthways and putting halves of different magents into the one pickup? I read a review of the screamin demon at harmony central today when the reviewer says he put half ceramic half alnic 5 into the demon and says its his fave pickups.

Has anyone had any experience w/ Heritages 525 or Les Paul type guitars.
I have been on an unofficial quest to find the best Gibson (or Gibson priced) copies I can get my greedy, grubby hands on!

There are so many threads in the pickup lounge that get repeated. Sometimes its as easy as doing a search to answer someones question. Could something be added to the faq or a sticky on some of the more popular questions?

Hey, I posted this over in the guitar part of the forum too, but I don't know where I would get the most help so here it is.
I'm new here, and I've got a question. I have a 2001 Gibson Les Pual gothic and the whole time I've had it the 490r in the neck was always overly bassy and muddy (even compared to other les pauls with a 490r in the neck) while the 490t in the bridge was just fine. This weekend I swapped the pots from bridge to neck and vice versa and installed a set of SD seth lovers. I love the way the bridge seth sounds (which since I swapped the pots around, leads me to believe it wasn't the pots doing it) but the neck pickup is still muffled and dark sounding. The only thing I really haven't checked is the wire going from the switch to the pot. Could this be degrading my signal? Or would it really open this thing up to install all around 500k pots (since it comes stock with 300k vol. and 500k tone). My dad has recently got a 2001 gibson les paul studio with the 490s in it and his bridge sounds about the same but his neck pickup is much brighter and clearer.

We're playing Comfortably Numb at some talent show thingy, and I'm going to use my POD 2.0.

hi....
currently I've wired my Seymours in my SG the McCarthy way...

I hate to say it cos I've had good experiences with them in other guitars, but the 59s in my Hamer just sound horrible. They are crisp, and clear and have good note definition, but just are lacking any kind of growl and attitude...they also crap out under gain compared to the BBpros...they sound too quot;high fiquot; or sterile at crunch ,and then turn to mush as the gain goes up. I think they really need to be in a Paula that has more low end and low mids= to beef up the sound.

Yeah, here's a cool Marshall demonstration video, with a very good guitar player called Chris George, he's testing some different Marshall amps. Watch it, it's very cool!

NO CHEATING..no lookie at link