software

What color is this Super D?

Ok, so i have an jap 1983/87 fender strat. The pick up's are ok, i'll probably put them in my Yamahaa. But, I want to replace thepick ups in my strat with Alnico 2's in the Middle and Neck, and a lil 59' on the bridge.
Would this be right? or should i put the 59' in the middle??

Has anyone tried the Tech 21 Trademark 2x12 cabinet? Any opinions? It's got a nice price tag on it.

In the Immigrant Song by Led Zeppelin....during Chorus when Page plays A-E-A chords...he is getting a tremolo type effect on the chords....How is he doing this....I have tried a Volume Pedal, Toggle Switch On-Off, Guitar Volume Switch Roll....but none of it sounds right. If anyone has played this song and knows what effect or technique Page is using to get this sound...your advice will be most appreciated. Thanks in advance

I keep getting Eppiphone guitars with broken necks.... I buy them from local area stores for about the same rough value of the hardware on the guitar and then fix them up.... Last time i got a cherry red Les Paul Standard that the headstock was broken.... I glued it back together and use it around the house.... I have to refret it oneday as there is a hump in the fingerboard but after a serious dress it does play again but feels funny as there is almost no fret left at the 3rd fret....

I am lookink for a neck pickup to compliment the Distortion in the bridge of my RG. This guitar is primarily a metal shred machine played thru a high gain amp. Which of these two pickups will better handle metal toned lead work?

This is probably an old subject, but search didn't turn it up. I've put a JB Junior in the bridge of an American Strat and got it to work (of course) by reversing the lead-ground wires. The notch position above it is then out of phase (which doesn't really bother me) but iquot;m wondering if there is a way to have the whole enchilada. Thanks

Im fairly new to quot;stratsquot; I have a MIM body that I put an older charvel 6 point trem on.,..fit perfect. I recently got a 80s Squier with the quot;fat trem blockquot; and fender stamped saddles....Its too wide for my body! The mount screws are too wide, the block will not fit on the charvel plate and the saddles are too wide to fit the charvel plate without quot;fanningquot; even straight up they would almost put the strings hangin over the edge of the fretboard!
Now most of this would not surprise me if I wasnt using a FENDER MIM Body...Did fender perhaps use different bridge widths? Yes I need some schooling! Thanks

Hi!

Well,I hate to do this,but here it goes