software

Not clear from the duncan website - thanks

Im trying to install my Hot rails pickup (bridge position) into my squire strat. The original pickup had two wires coming from it...The white went to the pickup selector switch, and the black went to the volume pot. My new hot rails has 4 Wires: RED, WHITE, BLACK, GREEN. I assume the black wires goes back to the volume pot since it is the hot wire. The green I assume is a ground...where does the ground go? I have no idea about the red and white, I saw a section of the site that has a quot;color codequot;, and said that the red and white wires should be soldered together and taped in electrical tape...(is that right?). So if i have this right I have the green, and black i need to deal with. If black is hot (volume pot) and green is ground (have no clue where goes) then what wire goes to the pickup selector switch. Please reply if you know whats up on this subject, I can't stand having my guitar in pieces....Sorry for my ignorance....and thank you in advance for the help.

Hi All,

OK, so I'm looking at Musician's Friend at Peavey's post-5150 amp heads with like 6 12AX7s for producing gobs and gobs of gain, which is fine. However, when I use my little Ibanez Tube King (that has one 12AX7) with an amp with one 12AX7, I can get a very tubey, overdriven metal sound. Why doesn't Peavey (or another company) simply put a Tube King type circuit in their amps for the gain? I guess the fact there's a ton of op-amps in the Tube King makes it not-so-tubey, and traditionalists would not tend to like that in an amp head, but would rather the distortion come from a half dozen tubes. Sounds pretty similar to me though! You just don't see many one preamp tube high gain heads that also have power tubes.

almost mint vintage 54 tele neck pickup for sale. $35 shipped via registered airmail to your door. paypal preferred.

how do they sound in an ash body maple board strat?
is it worth it to upgrade them to duncans?

Guys,

Fender 5E3 tweed Deluxe: Celestion G12 Alnico Blue

Its a Boss DD2, works perfect, but i have had for 6 months and have had 0 use for it. I am a young guitarist and have never sold any gear to fund other gear. Should i hang on to it in case i want delay further down the road. Right now i cant see my self using it for awhile and i want to buy a different pedal.

i have a sd 1/4 pound precision pickup and i love the ernie ball stingray and i know a Jazz pickup will create more of that bridge humbucker like sound i love since my bass was originally a pj it wont be too difficult to put in i originally replaced the p pickup to get more of the mark hoppus bass sound and the stock jazz pickup was barely audible and it always gave a buzz on every bass the same model i tried so i removed it