目前分類:title (6014)

瀏覽方式: 標題列表 簡短摘要

My birthday's coming up, and I have about 80 bucks at my disposal.

software 發表在 痞客邦 留言(0) 人氣()

Just looking for a pickup to go in my warmoth strat at the neck. I'm going to be putting a distortion in the bridge.

software 發表在 痞客邦 留言(0) 人氣()

from : localhost/adam.fulara.com/

software 發表在 痞客邦 留言(0) 人氣()


A local guy is blowing 'em out on evilBay. He lives about five minutes from my office.hmmm, Warmoth variax replacement body and neck, perhaps?

software 發表在 痞客邦 留言(0) 人氣()

Finishing up specs on my warmoth mahonany L5 and had narrowed p90s down to Lfrahlins and SDs- Called Frahlin today and told him what I was up to- He noted that low noise noise was a requirement and suggested that I consider his split singles saying their sound is very p90 ish-

software 發表在 痞客邦 留言(0) 人氣()

I have a parts tele. Swamp ash body, maple/rosewood neck. What's the best match up for a neck bucker with something in the bridge that can fit in the standard tele bridge routing? I looked over the SD site and it would seem the alnico pro would be a good possibility for the neck bucker. What does SD make that would be a good match, both tonally and output? Thanks.

software 發表在 痞客邦 留言(0) 人氣()

I have never played a Framus amp but saw one on Ebay and noticed that the amp had a tiny little power transformer, im no amp tech but doesnt that mean that the amp doesnt get as much juice as other amps? I mean, when i look in the back of a Krank or Bogner or Egnater and other high gain amps its usually pretty impresive and once you plug in theres that powerful punch from the higher voltages that i love. A lot of boutique amp lovers seem to really be into the Framus amps and i want to try one out real bad. How are they getting away with the small tranformers? Or am i totally missing something (Im sure i am)...

software 發表在 痞客邦 留言(0) 人氣()

hey guys
just wanted some general feedback on sum tele pickup configs.

software 發表在 痞客邦 留言(0) 人氣()

Hi Guys! I have a Carvin Bolt with a walnut body that came with a dimarzio evolution in the bridge position. I did not like this pickup so I tried a JB. Didn't like that pickup either. Switched to Alnico pro 2. I really like this pickup, with one exception. My low E string does not quot;cutquot; like the other strings. I have this pickup on a 3-way switch for single-parellel-series and I love the sound in all positions. Its just my low E sounds bland compared to the other strings. I have messed with the height adjustment and really couldn't improve it to where I want it. Is there another pickup that would cut better in the low end (without being boomy)? I was thinking possibly the jazz. But I don't want to lose the good points of the AP2. Sorry about the long winded note.

software 發表在 痞客邦 留言(0) 人氣()

The usual Stevo klugeo.. with some clipping here and there
warped

software 發表在 痞客邦 留言(0) 人氣()

For anyone who saw me whining in my 3 nightmare threads this is the guitar that is the source of tne angst.
Mahogany back(2 piece),sides and neck with a spruce top-all solid.It has a rounded Florentien cutaway,is electric,(balanced and unbalanced outs),with a tuner built into the control plate.

software 發表在 痞客邦 留言(0) 人氣()

ok ok, my ferraglides arrived yesterday from martinsixstringcustoms (awesome trader btw, this is my second graphtec purchase from him already )

software 發表在 痞客邦 留言(0) 人氣()

from : localhost/www.musictoyz.com/studio/rack/colorrack.php

software 發表在 痞客邦 留言(0) 人氣()

Hey guys, I recently upgraded my computer and I have some stuff left over. All of it is in perfect working condition.

software 發表在 痞客邦 留言(0) 人氣()

This guitar was made by a luthier (lawrence K Smith) that lives near me. I found it when checking out his site. One of the most stunning quilt finishes I've seen!
I dont like the color but its nice.

software 發表在 痞客邦 留言(0) 人氣()

Guitar is a Carvin DC-145 with alder body, ebony fretboard, fixed stringthru bridge, neckthru body, HSH configuration.

software 發表在 痞客邦 留言(0) 人氣()

I've got a 1978 les paul with a bound neck and I think she needs a fret job. I've had the guitar 14 years and have never treated the frets. I have the occasional dead note and overall the frets are pretty worn so I think its time.

software 發表在 痞客邦 留言(0) 人氣()

I bought a Lil 59 for my B Bender Tele today!! I got to play a Tele in the local shop with one of these in it and I loved it. I will be wiring it up tonight. I plan on changing out my pots since I will be coil tapping this puppy!! I might need some help or input so all you pickup wiring gurus please stay alert to my thread.....PLEASE!!!!

software 發表在 痞客邦 留言(0) 人氣()

Let me know if you have one and want to dump it. Color doesn't matter.

software 發表在 痞客邦 留言(0) 人氣()

Hey dudes, I just posted a new tune on my purevolume site. All it is is drums, some guitars fuzzed out courtesy of the SD Tweak Fuzz and vocals. Sort of garage-rock-y. Actually, very garage rock-y. IT was recorded in my garage! Check it out at I played everything, and it is my first time playing drums on a whole song.

software 發表在 痞客邦 留言(0) 人氣()