software

I'm working on paint ideas for the Warmoth SG. You guys generally like to see flames on a guitar with the base of the flames at the neck (a la Wattage's tele and TC's recently finished Tele) or with the base of the flames below the bridge?

Hey everyone,

hi dudes....so...after some treads asking this for gibson les pauls and their string spacing...i wonder if it´s the same for the x-plorer models...i´m going to order a jazz/duncan distortion set...but i have to decide first if the bridge pup has to be a trembucker or a standard version....

I've had it. I was just changing strings on my Les Paul. 3 at time so as not to have to worry about the tailpiece falling off. So I'm using the kink the string 90 degrees and them back under an up method of locking the string within it's own windings. Holding the end with my teeth guiding the string to wrap properly with one hand and winding the peg with the other.

just checking if grounding of a tele bridge is necessary when the tele lead pup does not have a baseplate.

KE3, KE2, but no KE1, marty friedman kicks ass why isnt his guitar onthere anyone have any ideas? im just curious really

just some riff ideas i recorded back when i had the guitarport.
all of them are just momentary inspirations that i got either through the tone or some other music/riff

Im Thinkin Bout Replacing My Bridge Pickup In My Squier Fat Strat With A Jb Or Possibly A Custom. What Is The Real Sound Difference? Will The Custom Distort Harder Than The Jb?

Thanks to the overwhelming response from my fellow forum family, I'm going to give the business another shot by carrying only 's line. I'm still dropping all other lines (Pots, Caps, TonePros etc...) because I simply don't have the time to deal with all the little stuff. I have another thread with all the left over electronics I have for sale (listed at or below cost).

Ok here is the Deal,
I have a Schecter Omen 6 with a JB/59