software

After D!ck and I went to the Hamer seminar at our local Hamer dealer I've been really wanting to play some, especially the Monaco III which Jol played. He said he designed this guitar for himself. My buddy Tommy and I went to the dealership on my B-day to get out of the house where Jamie could do her Taebo.

from : localhost/cgi.ebay.com/ws/eBayISAPI.dll...MEWA:ITamp;rd=1

My amp is currently out of service because my last speaker is up for ebay, so at today's jam i used my friend's fender bullet reverb.

I have a Fender HWY 1 Tele in honey blonde with a maple fretboard. I bought this guitar new about a couple of months ago. The neck on these guitars is the same as the American Series with the rolled fingerboard edges and 9.5 inch radius. The tuners are the Standard type Fender/Ping Standard Cast/Sealed Tuning Machines. The finish is done in acrylic laquer and is extremely thin and fragile; very nice for relicing. It has dings in it that normally would not show up in a guitar with a poly finish; at least not for several years... and I'm careful. I have worn the finish down around where my forearm lays; also, on the upper and lower bouts. It does not look junkie. It just looks played ... I have routed (cleany) the body to give it a universal route. The neck cavity is nice and tight and the bridge sits flat. I had also bought a Rio Grande Muy Grande bridge pickup. I ll include it in the trade. The pickup sounds really great. It s very big, warm, and punchy. It growls realy niceley and when you ad some gain, it takes on the thickness of a PAF.

Hey guys. I'm have an Idea that I think would looks beautiful but I suck at drawing.

from : localhost/cgi.ebay.com/ws/eBayISAPI.dll...ayphotohosting

Hi, I've noticed that the adjustable side of a humbucker (the coil with the screws) is usually turned towards the bridge for the brigde PU, and the neck for the neck PU. Is there any specific reason for this? I plan to coil split the HB's on my Gibson Explorer, would there be any specific reason to turn the PU's in any specific way? BR /miika

from : localhost/66.45.13.138/index.cfm?sectio...amp;news_id=42145

After speaking with Fender, I finally got to the bottom of my situation. When installing SD PU's in a 2004 Strat HH S-1, the polarities off the pickups need to be reversed. Fender also said, ignore the SD color codes and schematics. Only go by the Fender diagrams. Don't ask me why though? I picked up my axe today still without my new pickups. My tech said, now that he knows what to do he'll have it for me in a week. I'm going somewhere else. The moral of my story is, if I didn't do all the leg work (get wiring diagrams, color codes, Fender CS, etc.), my tech would still be scratching his _ ss wondering why the SD pickups won't work in phase!!!

I just bought an '05 Edwards '61 RI copy, laquer top series. It's walnut color, nitro finish, JB/'59 combo, long neck tenon (as any good SG should have). I hope to have it in a week or so.