software

The Vox head was plugged inot my Cyber Twin's 2x12 Celestion cab with G12-100 speakers and the cabinet is open back...

I built myself a wood casing and the pedals are held in place with smaller pieces of wood that rest on the side of each pedal. Are there products out there that would make this easier?

Tee
rock on!

Ok, I've asked this a couple of times before, but my situation has changed, so I'm gonna bug you guys for advice again.

I'll try this one more time before I put it on Ebay. I have an LR Baggs piezo system, it's a drop-in bridge replacement for a two post American standard trem, or any other two point trem with the same spacing as an American Standard bridge. This is an awesome piezo system, it really does sound like a good acoustic. The wires are completely hidden, so your guitar will maintain a stock look. It's almost brand new, I installed it and tried it out, but it doesn't have more than an hour or two of playing time. I've changed the specs of my project guitar a bit, so I had to buy the six screw vintage version of the X-Bridge.

well, we all know strats used to be pretty much THE rock guitar, but, by modern standards, it seems to me like teles have replaced them in that category

would it make a difference in sound if you changed the VOLUME pot on a guitar? if so, how?

Looks like I'm picking up a 2001 model korina artist.

I am planning on doing the JP wiring in my Edwards LP, I have the schematic, but I'm looking for a list of the combinations, as far as I know there are 21, is that right?