software

will the antiquity I and II strat fit a bridge with a string spread of 2-1/4quot;? would the narrower bridge with a spread of 2-1/8quot; be better?

Well, two of the 5 anyway. The two main guitars I used are generally my Gamp;L Legacy and Nashville Tele, but these two are kinda interesting...

I bought new tubes for my Peavy Delta Blues (Sovtex EL84's and 12AX7LPS's) same as it had in it. Do i need to have it biased ? The EL84's are two matched sets is there a special order they are installed in?
Thanks.

The thing sounds KILLER ! Pure vintage tone. It's a Magnatone 440 1x12
combo w/t 2 6V6's and a bunch of pre and a recto tube I never heard of?

I installed a '59 neck humbucker in my mahogany carvin DC127 and its very bright! I'ts also more sensitive to hum (computer monitor, etc) than the bridge Carvin PU. I have to lean further back from the computer to avoid hum. Could I have done something wrong during installation?

I need to extend the hot/ground wires that come from the output jack on a guitar I'm working on. For the insulated wire, can I just solder more insulated copper wire to the end of it to make it longer? And what about the bare ground wire? All I have are a few spools of insulated wire to work with.

Dean ML 79

I've been toying with the idea of getting the Univalve head and was just curious to hear if any one has tried one out.Thanks in advance for any info.

Well at first I thought I'd get Stew Mac's refretting kit and learn how to refret and fret dress... But I bought another neck for the guitar that needs it. So I could just use the spare neck to learn how to take the fingerboard off and then replace it later. Since I have some money, I was thinking about getting a neck through neck blank.