software

I have a strat and want to put a Seth Lover in the bridge. Since Seths arent f-spaced/trembucker spaced, should I go through the hassle of the custom shop to get a trembucker Seth made or should I just get a snormal spaced one?

can someone enlighten me what is the difference?

Hey guys, do you have any good settings for playing Iron Maiden on the Guitar Port? I thought of recording my take on the solos in the trooper, but I absolutly stink at setting amps up. I guess it sounds ok now but could be hell a lot better =). I use emg HZ pickups in an all mahogny double cutaway guitar with ebony fretboard if that matters =).

for those who are interested

I am looking for a Humbucker for the bridge of my Fender American Series Strat/Rosewood fingerboard
for Hard Rock and Blues, with a Fender Tweed Deluxe amp. Thanks for any info.

I was wondering if there is anyway to get SD replacement pickup bases.
My wife found me a 64 Gibson Melody Maker that was modified (Pat Travers style), and has two humbuckers in it. I took them out and they are SD Pickups.One is a 59N, the other a JBJ. The problem is, rather than route it deeper, the tabs were cut down and modified to be shorter and screwed directly to the body. I am going to try and get this guitar right and route it so the pickup height adjusters can be utilized.Hopefully someone knows where I can pick a couple of these up.

2 words, bassman 170, yeah i said it, 170

Anyone know the proper way to say Seth Lover's last name, or is it simply the obvious quot;Love-erquot; ?

Thought this might work.Haven't tryed it yet though...First the rubber around the preamp tube(s) needs to be removed.I'm then hoping too have enough room to get these spark plug wire puller pliers around the tube so I can safely yank them out of the amp without having to spend an hour getting to the tubes! Once the amp is out of warranty I'll enlarge the holes around the tubes with a dremel tool if this plier doesn't get enough room to access the tubes..John; I was thinking about something, but first, is access to the tubes from the side of the tube, or the top?

250K or 500K. Suggestions?