software

Hey All,

Who here has installed double row hex poles in a standard bucker? Out of you folks that have, have any of you tried the Full Shred bridge and also the Custom 5?

Hey everyone,

yep, finally got a gig....up in northern New Jersey at a place called Errico's...

I don't mean types. I know tube types do, but I mean brands. If one brand of EL34 really all that different sounding than any others?

Here's the set up. A Humbucker in the bridge position and a Single coil in the neck position. I want to coil tap the HB and have the SC in paralell. The wiring's no problem. I know how to do that.

For those of you led astray by errent advice... here is a post from another forum that should dispel any doubts about quot;smaller strings being less likely to breakquot;

I have a problem I would like to see if you guys know the best solution! My OLP MM1 Axis has a standard trem on it. Now this guitar in standard tuning will stay in tune pretty well with HEAVY trem use, I'm talking bottoming it out, I treat it like a Floyd and it handles it very well. Now when I'm drop D it goes incredibly out of tune, it actually seems to pull the D sharp and the other strings flat a bunch. This is a problem since I need this for Seraphim shows and our stuff is in Drop D. Now when I got the gutiar I knew it would need upgrades. I have upgraded the pickups and it KICKS! But what I'm thinking, I'm guessing a set of Sperzel locking tuners would fix this problem immidiately correct? What are your guys thoughts on the matter?

I'm having some trouble installing a Little '59 in the bridge position of my Strat. It seems to be a bit larger than the hole for the bridge pickup in the pick guard. My question is, is there something else that I should do? I would be a bit skeptical about forcing the pickup through without knowing that it has to be done.