software

Hey everyone. I currently have a Roland GR-33 Guitar Synthesizer (including the special cable and the AC adaptor). I'm interested in trading it for an Electro-Harmonix Microsynth (retails for $260) and either a E-bow ($79) or a Boss TU-2 chromatic tuner ($99). So adding up the value of the stuff that I want, it comes to either $340 or $360 depending on wether I get the E-bow or Tuner.

i have an esquire that i slapped togeather. '62 jazzmaster neck with a swamp ash body, reverse slant callaham bridge (lefty bridge with righty saddles) and the pup i wound at ugd. a 11k/6.5k tapped alnico II flat pole tele pup wound with 42 awg plain enamel wire, after putting the string around the coil i had to widen the hole in the bridge to fit the sucker in.

I got my new 83' gorgeous LP custom and am getting it refretted and looking for pups. My other 2 Customs have WCR Fillmores and Zakk EMG's. I love the Zakk EMG's personally. This LP will be tuned to Eb to D and I was thinking about:
JB/Jazz but am worried because people are so spread apart on the love hate issue4 on these.

I am going to add a Pearly Gates HB to the neck position of my guitar to mate up with a Custom/ Custom in the bridge posiiton. Will the Pearly come with a silver cover, or is it extra?

What were some good years where Gibsons quality was really good that I could get a les paul for a decent price?

I'm thinking about putting one there. I heard it once in a Strat (alder) and even though it was disguised by a Boss GT6, it still sounded amazing. It had a really sweet clean tone, very clear and articulate. But mostly I play blues on there (on a single coil more than a humbucker) and I don't know if it'd work out well.
How about one in the middle as well? I wanted a coolrails there first but eh, maybe swap them around?

ok, it's not really modding but a slight alteration. I wanna change my Spider II 30W 1x12 Combo into a closed back just to give it a tighter sound and so on. The woodwork itself isn't a problem but would it even be worth the effort? The speaker is a celestion G12E-50(custom design for line 6 so no further information to get). So if anyone here can help me to find out if it would be worth it and if there are any special wood recommendations i would greatly apreciate it. Thanks in Advance.

Hi, I had a custom guitar made about 4 years ago and had the maker put two seymour duncan pickups in, i also asked him to put a fishman acoustic pickup in. My problem now is that the quot;TB4quot; pickup at the bridge broke a few weeks ago and when i took it to be replaced i asked the guy to strip out the acoustic pickup (which he did) and asked him if he could replace the acoustic volume control with a push pull pot to change from humbucker to single coil. He said I couldn’t do this because of the selector switch (5 way prs rotary pot) I just wondered if anyone here had any ideas of how to get around this problem? (P.S. the the way it’s wired now has dropped the volume of the split signal (single coil) to almost unusable. That is the third time it has been in the shop so I don’t want to spend any more money on him looking at it, so I was just going to have a go myself. Thanks for any help. Alfie. (sorry it's a bit long winded)

An ongoing problem as I tend to get a bit anal about exactly how much reverb I should be using at different points in a song.

when i'm playing my tele and it feels as if the strings are scraping on the frets? my first inclination is to say that the tops of the frets are not smooth, as if they are all scuffed up and thus making the strings not glide on them smoothly when bending.....its not big deal just playing on frets, but when bending, i get this metal on metal type friction when i bend and its very frustrating, i want to grind my teeth when i sense that its happening