software

hello all,
i was wondering if anyone could help me wire a trembucker to a volume,tone knob and output.Ive had to replace the guts in a old kramer and i have the Trembucker laying around.I am eventually putting in a reverse zebra jb but this TB will do till i can afford it.I was originally wanting a screaming demon but a fren told me the reverse would be better with the wood of the guitar...Thanks!!!

OK, as many of you know, I was looking for S-C sized humbuckers for my strat, but I have found out that my guitar is routed s/s/h, and even though I prefer the look of s/s/s, I think a full sized humbucker is what I need to get the sound I want.OK, so I'm pretty much back with all my options open so please help me out, heres what I'm looking for:

I have an ES-137 and find the stock P-90's way too noisy. I have been told that the SD P-90 Stack will retain the P-90 tone (mostly). I see that the Stack P-90 is 4 conductor, so I am looking for wiring options. Suggestions?

2000 MIM Fretless Jazz with EMG J Active pickups. Like new.Violet with nice deluxe gig bag. Original flatwound strings included too. $350 shipped OBO E-mail for pics.
1980s Squier Strat with Classic 60s pickups

I've got an old JB in my LP right now, but I think it might be due for a repotting (I'm getting constant squealing...much more than with my Ant). I'm anticipating that this could take a while to get this done at HQ, so I'm eyeing a Custom and a spare A5 magnet I have laying around. It's either that or a Dimarzio Super Distortion.

I'm just wondering if anyone ever done this before. Instead of installing a real humbucker and losing the true voice of my Strat, if I mod it to allow bridge middle in serie, I guess I could get a humbucker-ish kind of tone right? Sorta like a Stag-Mag?!

I had a 500k push/pull pot installed in a Yamaha AES620 (mahogany body, maple cap, set-in neck, JB bridge, 59 neck, two vol and master tone config w/ les paul switching and coil tap).. I like the nice even taper.. but the JB sounds a lot less trebley.. seems to have rolled off the highs... initially I thought this was the SD pickup cover I added on it but I'm starting to think that going from the initial 250k tone pot to a 500k altered the tone.. is this common and will switching to the 250k quot;brightenquot; my tone?.. I was told that 500k's are usually preferred for SD pups.. is there an quot;optimalquot; pot for a JB?

Would be interested to hear any opinions as the time has come for a replacement. These are the two more expensive valves available from the site I've always gotten valves from. The Mullads are much cheaper, does this mean they're not as good? Although I've been informed in this forum that the Groove Tubes are over-priced.

I have remixed this for tone purposes, ignore the actual song im only interested in what you think of the tone. from : localhost/www.digitalsoundplanet.com/Me..._000028909.mp3

Anyone got the schematic handy?