software

…and put the 490R and 498T from the LP Studio in. I typically don’t like to post pickup reviews so soon after a change, but my first impression is that I might like this combo better than the CCb/SD combo I had before.

In my Explorer! I had tried it before and wasnt happy so I converted it to a C5. This was good but the lows were alittle extreme so I tried an Alnico 4 to make a C4. That rolled off some of the lows but kept the same basic eq pattern. I liked the smooth character. I recently got a LP and put some very sweet sounding pups in it. So, I wanted a more rude alternative sO I put back the ceramic magnet in the explorer and now have a ripper! Having alot of fun with it!!

I recently picked up a 20th Anniversary CU22, which is a killer guitar!!! The Dragon II's it came with are too muddy and undefined for my tastes. Anyone have a favorite PRS replacement pup? I play hard rock/metal and I'm into low/med output pickups.

This is the original MG series head made before Marshall inserted their built-in effects in their amps. 2 channels, effects loop w/ loop level, boost channel has a low/high contour, damn good condition. Bought brand new in late 2000, single owner. I still have the original box, manual, everything minus footswitch (transaction pending).
$200 shipped.

This is for a local wood shop. I think it is turning out well.I'm going to put a single Duncan in iit. The neck is maple with a maple fingerboard. Finish is TruOil.

Yeah, it´s me again

Hello all,

Hey people! Just wanted to stop in and say that i got my new 50's Esquire modded just where i want it and it turned out pretty darn cool!

It comes out that my father has made a guitar as a hobby. He doesn't play guitar but he works wood quite nicely . I've tried different pickups on the guitar but I'am not particulary sure which one I like the best. I would like you to suggest what pickups would you use on it only knowing the specs.

I have been trying to wire my Gamp;L with out a tone, because I never use it, but I am haveing a hard time getting it right. I can't seem to get the wireing configuration correct to have both pups on or one off and the other on, and have it out of phase too. Would I be better useing one master volume instead of two, and should I leave out the four way Tele switch or put in a LG style.
I got it put back together with just the two volumes, so that I can at least play it again.

ok.. pickup covers alter the sound of the pickup right? or am i wrong? say i got a pickup with a cover and i remove the cover will it sound just like if i wouldve bought it without the cover? how exactly does the cover alter the pickups sound? i somehow associate pickup covers to slightly less quot;agressivequot; sounding pickups.. tho i never realy could test this theory of mine exept for once i tried a Custom uncovered and a Distortion covered and i stayed with the Custom cuz to me it sounded more quot;agressivequot; somehow.. tho i might have been just the guitar, the amp, the fx and setup or how i wired it or something.. it was for a friend who had this realy shrill and ear pearcing sounding bridge pickup and i had to find him something in like 30 min before he had to go play.. so i couldnt realy test further and they're two diferent sounding pickups anyways..

I'm working on another MIA Peavey Predator, this time for my little brother. He wants a Frankenstrat copy (the black and white one), basically. It's getting to the point that we're going to have to decide on electronics. We've decided on a Custom Custom for the bridge. He's heard mine, and that's what he wants (He might even get mine, and me get a different one.).

I have a fabulous Mesa/Boogie DC-3 combo that I am looking to sell, or trade for a Line6 Flextone III Plus. Here are the pertinent features:

I'm currently looking for a schematic to wire a push/pull volume pot into my Jazz Bass. It has the usual two passive single coils with two volumes and one tone. Any help would be greatly appreciated. Thanks.

I have a Boss GE-7 pedal, and as soon as I plug it into either my effects loop or into the signal chain I get an instant boost in treble. The thing is the pedal isn't even turned on and it alters the tone. It's like turning the treble on your amp from 3 to about 5 when added to the signal. Any EQ's out there that are true bypass? Thanks

from : localhost/Revengequot;

Hey guys. I just received the black Epiphone LP Custom (pretty nice) I bought on eBay yesterday, and managed to put a nice scratch in the finish with a string end within the first hour of owning it
It's not too thick or deep of a scratch, but definitely visible. Anyway to buff this out or make it less noticeable?

I NEED either one of these foor my Rivera Knucklehead, know one in NZ carrys the Airbrake so i'd have to buy it without tring it. Ive heard mixed reviews on the Hotplate, and nothing but good ones on the Airbrake.
I know they both do there jobs in a different way, so does anyone have any experience with both?

I have a Lite Ash Stratocaster which came stock with 3 Alnico-II Pro single coils. I want to install a bridge humbucker so I can use it live next to my LP (stock HBs).

i have a matched quad (x4) of JJ 6v6s
and also 5 ECC803s which are long plate ECC803 or 12ax7. they are very sweet but just not for my amp. More similar to a low power 6l6 than an EL34 and one of the best replacements for blackface fenders like Deluxe Reverb.