software

Hey you guys whatsup, i want to change my floyd rose unit that came with my ibanez axe for an original floyd rose pro, but i have notice that not all the nut are the same size, there are like 4 or 5 sizes. my question is how can i measure my axe nut ???
thanx for any info, ROCK ON !!! JJ

I finally found a use for my first ever guitar. I use my les paul for a full, thick, hard rock sound, sometimes in drop D. My delux start is for smooth rock/clean and a bit of blues. Ibanez s470 for more envolved solos etc. Applause electro accoustic for accoustic (obviously )
All played through Marshall TSL60 and 1960 cab.

Compare the strats made by Fender and Gamp;L.
Thanks guys

I'm new here but I know some from other forums.
I'm looking into one of these amps it has been modded... extra preamp tube, second channel with independant transformer and master volumn. Mods are reputable and done well. Amp sounds killer has tons of gain in the preamp may look into 12AT7's and see if they work better. Other wise channel one sounds origional channel 2 introduces a more dual rec type gain. Also 1/4 jack for footswitch has been installed... defaults to channel 2.

I borrowed this pup from stratdeluxer97(THANKS John!) to put into my Custom Tele.
Specs:

Hey all, new around here... I'd like to know a bit more about the quot;Duckbuckersquot;. As I understand it, they are 4 conductor humbuckers in a single coil configuration. But can they be wired for phase reversal via switch, (i.e. between neck and mid)? Do these pickups sound much different than coil tapping two humbuckers?

Ive always wanted this wiring setup for my guitars but i could never find a schematic for it and it would be perfect for me.1. bridge humbucking (only because thats the most common spot out of habbit for me)
2. bridge bucker split for single coil bridge

I'm having tone psychosis and I hope someone can help. I use a Mesa F-30 on stage and I rehearse with a Blues junior . I love the way the Boogie sounds but. it lacks a little warmth. I have tried to use both amps together by coming out of my boss delay using both outputs but I don't think that the signal is strong enuogh to drive the amps properly. I also tried coming out of the recording out jack of the Boogie into the Fender but it overdrives the amp with too hot of a signal. I could sure use some info guys, I know some of you are using multiple amp setups and could enlighten me. Thanks.....Joe

Looking at the following pickup on ebay... trying to figure out which model this one is.

Hey guys I've been wondering should I really get a triple rectifier or is there something else out there that does this Mesa tone but BETTER at the same price? The thing I like about it is I like to have three channels: clean, slightly dirty, and then heavy dist. What do u think?