software

What are the top acoustic amps on the market these days? Are there any large structural differences between acoustic amps and electric amps? Do acoustic amps run on tubes?

Can they pull high-gain?

My little brother has been needing a new electric guitar for some time now, and he finally got a Peavey Predator almost identical to mine:The tuners, as was the case with mine, are worn out and very loose. I know I can always drill/ream larger holes for new tuners, but I'd like to find some direct replacements. The holes are smaller than the Planet Waves Auto-Trim tuners. I borrowed one of Luke's old Gibson tuners to see if it was vintage size. The hole itself is bigger than the vintage tuner, but the sleeve/grommet is smaller. Has anyone had any experience with these or am I going to have to buy a micrometer?

This classic juxtaposition appears again, but now from a bit of a different position:

Generally... How well does a metal covered humbucking pickup stop hum and noise over a non covered pickup?

I want to put pickups in my 92 Jackson Dinky. It has two humbuckers and a Floyd. It also has a maple fingerboard. I primarily play in a classic rock band. Any suggestions (especially from people that own this guitar). Thanks Frank

Custom Custom trembucker, or duncan custom trembucker.
and Pearly Gates NECk.

The thread on compound radius necks got me thinking...I'm in the process of setting up my new Warmoth, and it could probably use a fret level. I am experienced with fretwork, enough that I could easily do a level/crown/polish on a straight radius neck. But what's the best way to go about doing a fret level on a compound radius neck? To make it even more challenging, the frets are stainless steel, which is much harder on your tools than nickel silver fretwire. I know some of you have experience with fretwork and stainless steel frets, any suggestions on the best way to level frets on a compound neck? Thanks.

If I put an Invader bridge in the neck position what will be my result, will it be horrible? I bought two Invaders and got both of them in the bridge! What are my options? Please help me.........................

I am loading my only strat with a CC in the bridge and want two hum cancelling duncans for the neck and middle?
i know NOTHING about single coils but that normally they are NOISY