software

from : localhost/cgi.ebay.com/ws/eBayISAPI.dll...tem=7311805098

from : localhost/cgi.ebay.com/ws/eBayISAPI.dll...308437353amp;rd=1

Any suggestions? This axe belongs to a teenager (read: POOR) at church. He plays it sometimes, but usually he ends up borrowing someone else's guitar for church. I think with a new set of pups and some tuners, this could be a decent axe.

HELLO GUYS, IM NEW HERE AND I WANNA POST THIS LITTLE GUITAR PART THAT I RECORDED SO YOU CAN COMMENT ABOUT SOMETHINGS(MISTAKES MOSTLY... WELL I HAVE TO SAY THAT MY RECORDING SYSTEM IS AS BAD AS MY EQUIPMENT(GUITAR, AMPLIFIER), SO WELL, UNDERSTAND THAT PLEASE.
P.D: I THINK THE RECORDING IS SO BAD THAT THE HI-FI MODE SOUNDS AWFUL, SO JUST LISTEN TO THE LOW-FI MODE OF THE SONG, AND COMMENT PLEASE

...not necessarily the one found in an amplifier, but just in general. say i have two capacitors both with the same rating (in this case, it's .001 uF). if i wire them together in series, will that simply add the values, giving me .002 uF?

The first one of these guitars i noticed someone had put out on their verge... WHO THROWS OUT A GUITAR!?... i immediately took it home and inspected it, i could barely find any information about it but it appears to be a hand made 1890 -1920 classical guitar. The brand is Columbia and some idiot has written fret numbers on it *shakes head*. It has major cracks in the body but all pieces remain intact.

Hey dudes, I just got my Reverend Slingshot Custom guitar. I'm so impressed. KILLER axe for the money. It has 3 P-90s. I'm pretty sure these are the perfect pickups for what I want this guitar to do. Tonally, they sit someplace between a glassy vintage fender single coil and a throat paf style humbucker. I've got my amp set up so that by the way I attack the strings and manipulate the volume knob, I can push the guitar either way. This is so badass. I highly recommend Reverend, but it takes them a long time to build stuff, so be prepared to wait. Mmmm... pics and clips are coming.

Just won a nickel covered JB i bid for and got it for a decent price too...wasnt actually expecting to win it to be honest!

Hello everyone, I'm new to the forum. I suppose I'll start with a little about myself and then get to my inquiry.

its on ebay for anyone interested. 99 cents opening bid and no reserve

before i got my SG i never had a guitar with a nitro finish, or any finish where you could really notice a nasty buildup of any crap. i always used to just wipe my guitars off with a damp or dry cloth and that would do it for me.

I've just wired my washburn guitar using a multipole switch, using the schematics provided by DiMarzio. The selections are as follows:

Im trying to set up a rig (not mine) where a marshall jmp1 valve midi preamp can be controlled by a behringer midi controller fcb1010 floorboard. Its for my teacher and he doesnt know much about midi and stuff so i helped him today set it up, but i couldnt for the life of me figure out how to set up the expression pedals to do anything...anyway details below.

I have a guitar with a '59 in the neck position. Iquot;m thinking about coil tapping it. Do any of y'all have this set up? How's it sound?

Hey guys, I'm Jeff(a few of you will probably remember me, I had an account on here awhile ago, but I forgot it).

Specifically on Rust in Piece?

Hey guys,

What a good sound these have. I replaced the 498T/490R set in my Studio, with Gibson 57 Classic, and a 57 Classic , and thought I'd give a shot with the '59 model in both positions.

A friend of mine just got a guitar built for him, with parts. Squier Affinity neck and I haven't formally identified the body yet, but it does appear to be genuine Fender toploading. It apparently used to be on one of Billy Corgan's guitar that he smashed onstage. There are no string through holes and there doesn't seem to be dowels. There is some problem with the bridge: being a toploader, shouldn't it have 3 vintage saddles? This one has 6 individual ones (old school) and the strings rub on the springs, and they aren't aligned with the pickup polepieces. I'm setting it up for him. I'll first try replacing the saddles but obviously the holes are not going to be proper so I may have to replace the whole bridge and I haven't found anywhere that sells toploading units.
I haven't had a long enough look at it yet, though I already saw that the nut is filed way too high and the neck has too much relief. It plays pretty bad too.

I recently aquired an middle Texas Hot Antiquity from eBay, but it has no cover. I was wondering if anyone out there would be willing to sell theirs or would know where I could find some.