software

hello everyone i am new here and have a question
I have 3 LP's customs one Zakk sig,one black beauty and one wine red.

was looking to add an additional speaker to my dsl 401 so i can have 2 speakers ,what do you reccomend
and whats in there origanly ?

I just bought a JB amp; a Custom, between the two what do you think rocks the best ?

Can anyone help me out with a diagram or advice on how to wire up a SH1 JB pickup, with one volume one tone, and a 3 way blade switch that has 8 soldering points-4 solder points on each side of the switch, also using a 500k volume pot and a 250k tone pot. I took this pickup set, pots, and resistor out of a Jackson Soloist and put it in new pickguard for my 84 Strat, they sound great in the Jackson but sound dull, muddy and lifeless in the strat. The Jackson had a 3 way toggle switch that was left in the Jackson, and I purchased a new 3 way blade switch for the Strat. I just want a standard setup, Switch in rear position-bridge pickup, switch in middle position-both pickups, switch in front position-bridge pickup. No matter what I have tried it just sounds like something is not wired right to the 3 way blade switch or the positon of the resistor is wrong, and s website has no diagram showing how to wire 2 humbuckers, 1 volume, 1 tone, and a 3 Way Blade Switch. Anyone that can help me out would be a life saver-Thanks.

First time posting. I have a mexican Strat that has very heavy wood causing it to sound predominantly thin and tinny. I have tried a Fender Tex Mex set, and a Bill Lawrence set and it still sounds like ass. I was wonderng if you guys could recommend a set of SD pickups that would fatten up the sound while still retaining a relatively Fenderish sound. I really like the neck, and the guitar looks cool, so I'd like to make it work as a hot Strat. Thanx

My buddy has a Peavey Supreme 100 watt head and a 4x12 cab and he likes the sound, he just wants it fuzzier...like as fuzzy as Japanther if you're familiar with them. Any suggestions?

I just swapped the neck humbucker in my Jacaranda guitar with a Jazz Neck!

I want to get a little better understanding of how tone pots really work. I tried to Google up some help, but didn't find what I was looking for.

Hey, I own a Yamaha Telecaster copy that I've been meaning to change the pickups on it and I was wondering if an Invader in the bridge and a Pearly Gates in the neck would be a good combo? Or, if this is the case, a horrible combo? What would go good with an Invader?

So, I need to play through a few amps. In particular I want to play some 80s vintage Marshalls (800s), and should probably try a few other models as well. Problem is, no places in the Portland area have any older amps (just new Marshalls, some 5150s and Triple X's), or at least I don't know of any. So, I was considering maybe taking a day trip to Seattle or some other place. Anyway, where do y'alls go to test drive new stuff?