software

Gday

Hey man, what was that amp you were playing through at that first music store we went to in Santa Barbara? The one that had the built in jam tracks and stuff. I think it might have even been a modeling amp too. I just figured I'd read about it if you remembered what it was. Wasn't it pretty cheap too?

I was considering making it a VH strat by getting a one bucker,one volume knob black pickguard and getting it painted white(sorry no stripes)
it would have the lone duncan custom TB-5

1. Ever have one of the string lock blocks get caught in in the saddle, and not be loose enough to really lock the string properly? this happened to me the other day, when I was restringing it, and the string lock on my b was like this, all I needed to fix it was a small flat head screwdriver, a set of small needlenose pliers, which were originally used for dealing with electronics and such, they need to have small teeth on the tip. I just used the small screw driver to push the block to the middle of the space, then gripping the block very tightly with the pliers, wiggled and pulled ever so slightly until it was finally out. you can't just grip it and pull, without scratching the floyd possibly I had a replacement from stew mac, and now it slides around perfectly. I don't know what causes it to happen, but thats one way to fix it.

Can somebody please help me out. I hate guitar hum ALOT and so this is really bothering me. So I have a 7-String Jackson with 2 humbuckers, 1 Volume Knob, 1 Tone Control, and a 3-way Switch. Originally, the guitar had 2 Duncan Designs humbuckers. I replaced the bridge pickup with the SH-4 JB (7 string version).

Not much info available on their SITE....anyone fam with these amps?

.......put a bridge pup in the neck position? wouldn't it just be a hotter neck pup?

TattooedCarrot showed me this finish that was in the showcase last year for warmoth bodies.
I emailed Gregg to see if they could still do it and he told me they couldn't. It's such a shame. I finally found a paint pattern that I liked for my strat project and it can't be done. I was going to do candy blue flames over top of alpine white, that would have looked really cool, something like this:

Right now I use a 1981 Gibson Les Paul Custom. It has stock pickups, so what pickups would it have in it? How would they sound compaired to a Gibson PAF?

Like it says.
I gots a White Duckbucker For Neck position and am looking for a White Cool rails for Neck Position.I could get a picture for you of it if you request.It is in excellent condition and has plenty of lead left for Neck position.

I've got a Warmoth P/J bass which I wired up according to this diagram.

Hey !

Three Mullard ECC83/12ax7's labeled quot;Fisherquot; and one ECC81/12at7 labeled quot;Daystromquot; I have no way of testing them, but they all work and were all tested to be good when I bought them within the last year.
The Daystrom was matched for a phase inverter.

What do you guys think is a better bang for your $$ for a set neck, 2 humbucker guitar. A pickup change would be in order, so that is not too important. Their both fat bodied, mahogany, set neck guitars, with the biggest difference being a tail piece on the Paul, and string through on the SZ. I play mostly KISS, ZZ Top, some 80's metal, Motley Crue, etc. Nothing too heavy. Which one should I get?

What are the tonal qualities of ash?

I'm currently in the middle of refinishing my Warmoth. I dyed the top a sort of blue-green burst and I'm on to the sanding sealer step. Being the idiot that I am, I managed to sand through the sanding sealer while level sanding, and I now have a band around the edge of the top that needs to be resprayed. Keeping in mind that I'm using water based dyes and nitro sanding sealer, is there a way to respray the edge without completely sanding down and starting all over again? Is there something I can mix the dye with other than water that will let me spray through the nitro sanding sealer?

Hey guys... I'm still sittin on my moneycause I'mwaiting for my new flat to befinished, so I still haven't boughtmy new amp... And I was wondering if it's possible to get JCM800ish sounds out of a JCM2000 DSL...
thanks

Any non-functioning pedals you want to sell, PM me. Metal chassis is preferred. Stompboxes and wah/volume type rocker pedals. Don't care about paint or condition of electronics. Thanks!

Well, I just bought a duncan livewire at my local music shop here for 25 bucks, BUT...I dont know what it is.