software

I've got a Warmoth P/J bass which I wired up according to this diagram.

For a while, it was fine, but recently, I've begun to get this annoying humming. The humming goes away completely whenever I touch the control plate (which is metal), or the output jack.

Does anyone know what might be causing this and how I might fix it?

Thanks alot,
Jacob

Go back and check the EA Board, I posted some info. It's probably just a cold solder joint.

What's the EA board?

Jacob

Ha! Sorry, wrong guy. I thought you were someone else...

Guess so. I'm just one of many Sid Vicious/William Shakespear fans apparently.

Check all ground connections, especially at the jack. All of those ground connections should be connected whether it's the back of a pot or some other point.


Originally Posted by ErikHCheck all ground connections, especially at the jack. All of those ground connections should be connected whether it's the back of a pot or some other point.

Ya i was thinking that it must be a ground connection too.. I'd be checking your ground connection that goes to the bridge from the pot... Never know it might be the sorce...