software

I see Scott's method in the Vault. My JV strat has tuners with a hole in the tuner posts, like the tuner post is bored out and the end of the tuner is slotted. I wish I had a pic of it to post, but, I'm sure you guys know what I'm talking about. Do you guys purely use Scott's method and ignore starting with the string inside the tuner post? Or do you cut off the tag end and tuck it into the hole after the first turn?

Gentlemen,

im wantin to beef up my bridge pickup in my fat strat. i mainly want it to give me versatility for diffent metal hard rock groups such as ozzy to metallica and its gotta have great sustain for sustaing solos. and also would be nice if it had a good clean channel to. Any ideas?

What do you think is the most comfortable and ergonomic guitar shape? Don't think about how it sounds just the shape of the guitar/bass.

Someone posted a link to a Bigsby-related mod site at IoN's '51 board and I found these pics there. I just had to post them, because this is one of the coolest guitars I've ever seen:
I really like that. cept the bigsby

from : localhost/cgi.ebay.com/ws/eBayISAPI.dll...tem=7308222534

Hey pals! Long time no talk huh?!

ok, so i read in reranch that after you do your clear coats and wait a few days you can go ahead and start to polish the finish using higher grades of wet paper.

Hey guys, I was at band practice tonight and I got thinking I might want to look into a POD or similar modeller. It should have good sounding amp models that can go from sparkly clean to all out metal, maybe a few effects, and be a great recording tool. I'm guessing the PODxt is a good start? Any other suggestions? Oh and state price if you can.

Hi,

Well, I FINALLY got it in... My Lil 59 was in the maiilbox waiting on me... I drove to the nearest city with music stores (1hr drive) and only one of them had a 500K Push-Pull pot.... At any rate, I have the operating room prepared, and the iron is HOT... But I have a few questions.....

Ok guys...I am looking for a new amp and while I have a lot of ideas for what I am looking for I though I'd do it like this...I gonna list specs and see what you guys think of!

All of you rectoverb owners might be able to identify with this... The multi-pin cable that connects my rectoverb's 3-button footswitch to the multi-pin jack on the back of the head doesn't attach itself very strongly to the footswitch. It's ALWAYS falling out and doesn't seem to want to stick in there, yannow?

Just wondering cos i found one on ebay:

what am i doing if i wire up a 4 conducter with the black and bare wires together, soldered on the volume pot, and the white wire on the side of the pot with another wire going to the switch and the red and green together, i did this and it works fine, but the pup sounds a little weak, have i wired only one coil or something? lol thanks

The pickguard on my DiPinto Mach IV doesn't sit perfectly flat against the guitar in certain spots. It isn't too noticeable, but I know it's there and I'd like to try to fix it. Any advice is appreciated.

Hello, do any one know were you can get a hold on Engl Fireball schematic?

Hi!

OK, so I've got a Mesa/boogie traditional-sized 4X12, and its served its purpose very well for the past few years, but lately I've been wanting to change around a few things with my setup.

Hey guys. I am looking at getting a 3 pickup telecaster and am throwing around a few tonal ideas.