any custom custom bridge pickup clips please. thanks!!
目前分類:title (5999)
- Dec 10 Fri 2010 21:02
Custom Custom bridge clips requested
- Dec 10 Fri 2010 21:02
are my humbucker out of phase with each other?
i got some pickups for my paul, duncan 59's for the neck and bridge... they sound pretty good but in the middle position i loose a bit of bass... it's doesn't sound bad but it seems a little odd... i tried flipping one of the pickups to see if it was wired backwards but it sounds the same... i've read a little about flipping the magnet in pickups 'cause sometimes the polaritys are reversed but i would think that seymour duncan designed these pickups to go together so they should sound right... i don't know, maybe it's the way they're suposed to sound but i'm not real sure... any ideas?
- Dec 10 Fri 2010 21:02
Stress Relief Jam
Here's a little jam I did. I've had lots of work piled on me the last two weeks, and I needed to jam a little. It's two takes. Both improvised. I quite liked some of the stuff I played, will probably record a better version when I get time.
- Dec 10 Fri 2010 21:02
Gotoh-Wilkinson vs Schaller-Fender
Except for the added range and tuning stability of the Wilkinson trem, are there any differences with the Schaller-Fender trems on American Standard Strats?
- Dec 10 Fri 2010 21:02
Rate my playing? (Iron Maiden)
Not much to talk about, here is me playing the solos in quot;The Trooperquot; and I'd appreciate it if some of you could comment on my playing (as long as you are nice )
- Dec 10 Fri 2010 21:02
Hot Rails go with Quater Pounder ????
I have a maple usa fender strat.
- Dec 10 Fri 2010 21:02
What Tubes are in Your Tube Amps?
Just curious about what brands, types, and exact pre tubes you use in your amps?
- Dec 10 Fri 2010 21:02
What neck HB with Blues Saraceno?
Now that I've found a bridge pickup that I love in my Strat (Blues Saraceno) I'd like to find the perfect neck humbucker. Typically, I have a real problem with neck humbuckers as I always find them to be too droney with not enough overall presence. This has been the case with other guitars and I have yet to try a HB in the neck position of my Strat. I'd like to have the neck and bridge HB's wired to a 5-way switch so I can try some differant coil combinations. Offhand I'm thinking of the Jazz neck model but I'm open to any suggestions. Also, where would be the best place to order a pickup as well as a pickguard from? Thanks.
- Dec 10 Fri 2010 21:02
Element combination question
Hello,
- Dec 10 Fri 2010 21:02
squeaking floyd trem springs...
I just got a new strat today and while i'm loving it so far i have one issue with it. it has a top mounted (non recessed or non floating, whatever term you like) floyd rose and the trem springs (4 needed for the 11-49 strings i use) squeak like mad when you use the bar. it all works fine just has an annoying squeak from the springs. i read about using foam in the neck pocket, and that didn't help at all. i also read about using stretched out cotton balls inside each spring which i'll try next (unless there are other.better ideas). aside from those two ideas, anyone else have any thoughts? should i just get all new springs and hope they don't squeak or is there an easy fix? thanks for any info.
- Dec 10 Fri 2010 21:02
Jazz Model Pickup for Bridge?
I was wondering if there is such thing as a Jazz model pickup for the bridge, or is there only one model and it could be used in the bridge or neck? All I have ever read is it being used in the neck. Thanks.
- Dec 10 Fri 2010 21:02
I finished the Strat!!
I just finished putting the 59's in my strat! Man, it sounds killer. I had to do some major wood work but it's definitely worth it. Notice that I took the tone controls out. I prefer going straight to the amp! And I put a Gibson type 3-way switch in it. Much better quality. I was skeptical about the red pick guard, but that's all I could find besides black. But I think it looks great!
Here are some links to before and after.
- Dec 10 Fri 2010 21:02
New Mincer song
from : localhost/its all me...
Drums are Stylus RMX, a wonderful groove program; fretless bass, mellotron, bagpipes, minimoog, etc are guitar synth, or guitar triggering software synths; Nylon guitar is a Yamaha classical; main melody is an Ernie Ball/Music Man Silhouette Special w/ APH2 amp; CC (both are used, just not at the same time!)
- Dec 10 Fri 2010 21:02
Hey Tele guys...
... who like to use lots of gain Which pups do you recommend for an alder MIM tele with an all maple neck?
- Dec 10 Fri 2010 21:02
Truss Rod adjustments
Here's the deal, see: truss rod adjustments have been discussed before as parts of other threads, but we need something that is Vault-worthy that adequately addresses this setup.
- Dec 10 Fri 2010 21:02
Cant decide on 500t replacement
I have left a message with alex at sd, about replacing my gibson les paul classic pickups. I thought i'd ask for a few opinions around here
- Dec 10 Fri 2010 21:02
How does a new pickup get created at Duncan?
Just wondering. Maybe nobody here really knows (except Evan and he's very busy). Does a team come up with it? Seymour or MJ?
- Dec 10 Fri 2010 21:02
What pups do you play besides Duncans?
And how/what do they sound like? I'm on the quest for different, interesting pups.
- Dec 10 Fri 2010 21:02
new clip, acoustic!!!!
this is like a week old, but i just put it up today.
- Dec 10 Fri 2010 21:02
Someone buy this!:
Someone buy this! from : localhost/cgi.ebay.com/ws/eBayISAPI.dll...tem=7375813080