software

Oh my god. For the life of me, I CANNOT figure out how to upload my songs to soundclick. ARRGGGG!

Anyone have a copy they want to sell? My fiancee's mother has told me to pick out a guitar related book I want for my birthday, this is the one I need, and it's out of print...

hi guys, i have decided on some 10-52 gauge strings for my 24.75 scale les paul. the lowest tuning i will be going to is drop C.

So you go into your local Guitar place.

Ok, so I thought I quot;basicallyquot; knew how a pickup worked, and what affected tone, but it turns out i dont. The thing that is puzzling me is resistance and output. What i've been led to believe is the the more output a pup has the more distortion you can get out of it, right? I used to think that resistance and ouput were proportional, an increase in resistance meant an increase in output, but i studied some spec charts and it turns out that this is not the case. So what does resistance do then? If output is independent of resistance, how does resistance affect tone?

Like new with long leads. These are wax potted A5 versions of the #1 and #2 Burstbucker.

Is this thing worth anything? people, chime in!

I'm looking into buying a mic preamp for recording guitar and vocals onto my PC. I've been using my cheapo 4-track as a preamp to boost the signal to line level into my Audigy 2 ZS soundcard, but the quality is obviously not that great.

Anyone try the Golden Age pickups yet? Supposed to be vintage tone. Way cheaper than DiMarzios and Duncans. May be a good reason for that.....or not.

Why isn't there a Princeton Reverb RI? The Blues Junior is in the slot once filled by the Princeton. A Princeton Reverb RI would be a great seller. I should drop a suggestion to Fender and see if they think I'm right. I could shop ebay and pawn shops until I find a used PR in my price range, but that's not really the point of my query.

On my Floyd locking nut, one of the allen bolts on the underside of the neck is unremovable. By that i mean the allen wrench that is meant to fit, doesn't. The head of the bolt is completely worn, so i have no way of loosening the bolt.
Does anyone have ideas about how to get it out.

At Guitar Center of all places. A 1955 Fender Deluxe (reverb I think). Old timey lacquered tweed, very well worn, ragged in places....looked like it had seen a thousand smokey bars and been tossed in the back of countless cars. It would look killer sitting in the corner of your guitar room with a beat up sunburst strat leaning against it.

Electric Lap steel guitar. Is there any problem with this? And Ill be tuning to Open D

I have a Behringer V-amp Pro pre-amp with a ADA Micro Tube 200 watt power amp. I use the clean channel (with some delay) of the Behringer and for distortion I use a Tube Screamer TS-9, and/or a Blues Driver. My guitar is a Schecter C/SH with Jazz and JB pick-ups. Right now I'm using a Marshall MG100 4 12's cab with it. I've been hearing a lot about the difference that speakers can make on a rig and I have no idea what speaker my cab even has. It sounds alright for distortion but for some reason my other guitar player gets a more clear sound out of his Peavey cab.

i installed a set of emg's 81/ 81 damn i got to say man they scream!!!!!!!! and they look killer on my c1 schecter silver top cream body binding black hardware , the emg;s match perfectly, the guitar sounds killer , imagine in a high dollar amp (mesa or something like it )
i got to thank tattoedcarrot i bought em from him he sended me everything the pots , clip battery, input jack, switc, everything wired up i just had to solder the battery clip

I made the mistake of ordering a Zebra Neck and a Reverse Zebra Bridge, and in order to get the reverse zebra look I have to flip the neck pickup around so the pole pieces are on the inside for the neck and on the outside for the bridge. APH-1N, and APH-1B

I just relized a friend of mine who I have only heard play maybe 5 times for a very brief time each time, uses a Dimarzio Evolution and he sounds amazing.

So, today I hooked up my amp and got this really heavy nasty distortion which I figured you guys might like .Here's how it all happened.

Black/PAF

If you recall my thread about the Carvin Legacy, I asked for feedback about the Legacy. I was very impressed with what I heard, as well as what I saw on the Carvin DVD, so I called them. My experience with Carvin was nothing less than terrible. The salesman was rude as could be, and I will never buy a Carvin product for as long as I live.