software

does anyone here have a maple fretboard with no inlays that could snap a high resolution picture for me?

A Peavey Transfex Pro Head 2x130watts and 5150 4x12 slant cab for $350 bucks?!

Does the metal plate where the pots and the toggle hook up really need to be there? My friend says it is a hinderance on tone and will sound better if you take the plate out and re-wire properly.

So I need a cab. I'm going to try and make a 2/12 cab. Now my idea as of right now it to copy a Mesa Boogie Rectifier Series 2/12 with a closed back. What I am guessing I can do it, with the pictures of every angle of this cab I have, is to copy the measurements exactly and the wood exactly and come out with somewhat of a similar sound although I am not expecting it to sound the same. What woods should I take into consideration for this project forumites? What wood does Mesa use and what's the price of this wood? All help and comments are very welcome!

Ok, no responses to my last thread so I'll be more specific in this one.

im lookin for a cheaper stack [half or full doesnt matter]that i could probably buy used. it doesnt really matter to me if its tube or solid state...... i play heavy metal like ozzy ,pantera, metallica, ect. any help appreciated

Although, I would think most of you would probably not be interested.....I continuously get asked about the quot;definitivequot; writings about tubes and how they work. Probably the best, but least easily understood, explanation comes from the most informative source most people never even think of....US Navy..

Does any of the tone masters hanging around the forum could give a little lecture on the tonal differences a swamp ash body make compared to mahogany body?

Hi, im new to the forum. i am seriously considering the hughes and kettner edition tube 20th... amp. i am wondering if this amp is good for metal such as slayer? thanks for responding.

here's the rough cut of the song that Richard and i are going to submit to the SD user cd it hasn't been mixed at all and i've redone the vocals since this recording but here it is anyways...quot;Suddenlyquot;

I've decided to follow this form to mod my SD-1:

I'm hot- rodding a 97 strat and I changed the electronics in it. I put all new pots in there (all 250K) that aren't Fender brand, but they are made in USA. I got Fender brand quot;aged whitequot; volume and tone knobs to go on them. After I installed the pots on the pickguard, and installed the knobs on the shafts I noticed that the knob skirts are kinda high off the pickguard. Shouldn't the skirts be very close to touching the pickguard???
Did I install the pots wrong? They have split shafts, and they came with 3 things- a washer with quot;teethquot; on it, a flat washer, and a nut. I installed them with the quot;toothedquot; washer on the shielded side and the flat washer and nut on the top side.

oh wow ---I'm so biotchin-- I'm so cool -- I'm so great -- la-la-la---

I pretty sure now I'm going to les paul guitar now instead of a pgm. My strat should good enough for my shredding needs, cause Yngwie Malmsteen can uses one to shred. Now I need to decide if I'm going a double cut or single cut. I'm going to guitar center to try some out to see which one's shape I would like better and if I actually like the sound of p90s. Right now I'm planning to get either a tv yellow or goldtop les paul. I'm looking at getting a Tokai MIJ if I decide to go single cut.

Just a couple pics of my axes (the ones not in pieces that is).And 2 larger pics of my newest addition: BC Rich NJ Classic Series MockingbirdNice family bro, that BC Rich is beeyooteeful!

Is there such a thing? A tube amp that can pull a large amount of tones and hasn't got a sky high price tag?
Even if your answer is no, and you had to give one, what would that answer be?

anyone know how much this head costs new, in Candain dollars? no cab just the cost of the head, all the prices i find on the net are american and i cant do the math.

It was the g-Flex,the thing looked killer.The speakers were angled slightly from each other slightly and it was quad ported at the bottom and the cab was really thick looking.Didn't get a chance to plug in but it is supposed to have a great low end reponse.
Anyone try one of these?

Hey Guys!

i'm tempted to sand down the back of the neck of one of my cheap guitars. the finish on the back of the neck is so thick and it makes the play sooooo slow. i've never heard of anyone sanding down the back of the neck, but its the only thing that came to mind. it's a 70's unknown brand les paul DC copy w/ p-90's...could be mij, not sure. ...any advice for this slow neck?