close
Since the Seth is not wax potted, removing the cover should simply be a matter of unsoldering, right? Once the solder is off the cover/pickup base, the cover should just lift right off with practically no effort at all. Am I correct in my line of thinking?
Its fits pretty snug and the solder can get pretty far in tha pup past the baseplate but thats essentially correct. I used a dremel to cut the solder I couldn't soak up with braid and a gentle nudge from a screw driver did the rest.
Don't try unsoldering. I tried it, and got no where. I gave up because I was afraid of overheating the pickup. Instead, take TheArchitect's suggestion and use a dremel tool.
全站熱搜
留言列表
