I Need to do the wiring for quot;2 humbuckers, 1 volume, 1 tone, 5-way switch, w/coil splittingquot; BUT my neck pickup doesn't have a splitting option (ie it's a simple two-wire one).
Can anyone point me to the right mod for the schematic that gives me the five possible cominations with two HBs, one splittable and one not?
Thanks in advance.
That combo, with a standard 5-way, is going to give you an oddball sequence. Its not too bad if you think of it like this:
With the switch in the middle, you have the neck. Moving forward adds the bridge quot;splitquot;. Moving backwards adds the bridge full.
If that will work for you I'll post the diagram in a moment.
Artie
This will give you, starting from the quot;topquot;:
1. Bridge (split)
2. Neck amp; bridge (split)
3. Neck
4. Neck amp; bridge
5. Bridge
Another way to think of this is, starting from the quot;bridgequot; position, the first 3 quot;clicksquot; are like a normal 3-way. Then you continue coming forward into the quot;splitquot; options.
Thanks so much - this is exactly what I wanted. The order doesn't matter: only five combinations to remember. I'll wire this up tomorrow and report back.
Thanks again Artie - this wiring worked well. Needed a little trial and error to work out some things, then realised that the switch wasn't quite making contact in one position. Two HBs on a strat really is a great combination for me - clarity yet power.
One thing that confuses me though. In the previous wiring I had (basically standard strat three pickup but with the last pot used as a neck pickup blend) the capacitor on the tone was wired between a lug of the pot and that pot's body. Now it's wired between the tone and volume pots. So - dumb question alert - I was just wondering what is the rationale behind deciding between these two methods?
Also, since the rewiring both the volume and tone pots behave quite differently - much more of an on/off action now rather than a smooth transition. No big problem, but I would like to get back to the smoother more gradual action at some point. Anyone got any clues on this subject?
- Nov 29 Mon 2010 21:01
Wiring for one HB with splitting, one without
close
全站熱搜
留言列表
發表留言
留言列表

