I'll receive my Strat copy tomorrow and I want to have one of the tone pots to control both the bridge and the middle piukcup. I read somewhere that it can be done, but can't seem to find it.
Can this be done or do I have to choose the bridge OR the middle PU? If so how do I do that?
Also, what value would you suggest if I use, say, a JB Jr. bridge and neck with something more traditional like a duckbucker in between? 250K for the tone pots and 500k for the volume pot?
Thanks in advance.
Sly, I can tell you about the pot values...I use 3 single coils in my Strats...as fo the woring do a search on the forum for JV Strat wiring...there was a thread less than 2 weeks ago started my Jump Marine where I posted 2 or 3 different schematics...it will show you how to move the middle tone control to the bridge and also goes into quot;50'squot; wiring...
Take a look at this schematic: (ordinary Strat wiring)
from : localhost//support...ol_2tones.html
See how one tone control has a light-gray line connecting it to the 5-way, and the other one has a dark-gray line? Add a short jumper from the dark-gray line to the empty lug right above it. That'll do it.
Artie
I have one of my strats set this way. It is fine. I have another set with the tone on the bridge and neck with non onthe middle (Jimmy Vaughn wiring). I like the effect better as impact on the inbetween positions seems better to me.
Originally Posted by ArtieTooTake a look at this schematic: (ordinary Strat wiring)
from : localhost//support...ol_2tones.html
See how one tone control has a light-gray line connecting it to the 5-way, and the other one has a dark-gray line? Add a short jumper from the dark-gray line to the empty lug right above it. That'll do it.
Artie
You mean like this blue line Artie:
So this way the tone pot will control both bridge and middle right?
Man that was simple. Thanks Artie.
As far as pots are concerned, I'll keep the stock pots for now and if I find the tone too dark, I may change the volume pot for a 500k pot.
Thank you guys!
留言列表
