software

What do you guys think, a guy on another forum said they work, but I'm skeptical.

from : localhost/www.fretrefinishing.com/pages...=1117532923223

Luke

Luke, there has been a thread on here before about this. I for one do fretwork (all phases of it) and I can tell you that you should save your money and get it done correctly for alot of reasons! I posted alot of the reasons in the previous thread. It was some time ago though!

It will sand out the worn area but, those frets will then be lower than other frets on your guitar causing even more buzz. It will not crown the frets afterwards, causing more buzz and most likely intonation problems. If you have a few frets that are worn, the rest of the frets need to be leveled to the same plane as the worn frets or, the worn frets need to be replaced and then they need to be leveled to the remainder of the frets on your guitar (depends on how bad they are as to which method I would use.) Over all, there is a good chance this tool will do more harm than good to your axe. There are a few more ins and outs of it but, those are the main points.

I would leave the frets to the pro's.


Originally Posted by theodieIt will sand out the worn area but, those frets will then be lower than other frets on your guitar causing even more buzz. It will not crown the frets afterwards, causing more buzz and most likely intonation problems. If you have a few frets that are worn, the rest of the frets need to be leveled to the same plane as the worn frets or, the worn frets need to be replaced and then they need to be leveled to the remainder of the frets on your guitar (depends on how bad they are as to which method I would use.) Over all, there is a good chance this tool will do more harm than good to your axe. There are a few more ins and outs of it but, those are the main points.

I would leave the frets to the pro's.

Well I thought you used that thing on the whole neck? not just the problem spots?

I believe in the adage if it's too good to be true it probably is.

Yes....leave my guitars to those who use their asses to burnish frets. I'd be more inclined to do recrowns myself than most supposed pros, I've got nothing but grief from most.

BTW, Christian said you quit, NICE!

Luke