software

i searched through all the wiring types at guitarelectronics.com and all the ones here but i didnt see the one that im looking for...im curious if someone could post a link where i might find one like this or if someone could draw a picture like that for me in paint or something ?

first off i have TWO humbuckers..i wana TRY to get as many things with them as possible... ( coil tapping / phase / series type stuff )

i have 3 spots drilled out for pots and a spot for a 3 or 5 way blade switch however i would like a killswitch in one of the holes..so that kinda leaves me with two holes..i looked at getting the stack pots but they are a bit too tall for me..

basically id like 1 master tone and 1 master volume with push/pull pots..a 5 way blade switch..and a killswitch...

im not sure what can be done with the push/pull pots and the 2nd and 4th positions on the 5 way blade

im not sure how you guys go but from the neck to the bridge id like something like this...

1-neck 2-inner coils 3-neck bridge 4-outer coils 5-bridge

then with the push/pull pots is there anything else you can do?

maybe there are better ways to go about this i dont really know much about it..thanks alot