software

If you don´t had to worry about money or existing technology what would your dream guitar be like ?Mine would be a strat body (tummy cut , arm cut)

HSS seymour duncan hot strat live wire pickups
with a extra rout (push pull) for the neck and bridge

The neck would be round in the front like Gibson and flat in the back like Ibanez with a all access neck joint
The trem would be a floyd rose with piëzo saddles and alternate tuning-lifts like the quot;trilogy hipshotquot; trem .

And also a Hex-midi config build in .

one multi plug and cable to send it all to my rack

How about you guy´s ??

Johnny

some kind of late 50's sunburst les paul, preferably one with tones of mojo!

there are just so many!

Body: Double cutaway of my own design ... Chambered African Sapele Mahogany, Maple top. Special Forarm/back contours Lower horn contour

Neck: Set-Thru or Long Tenon set neck Wenge neck wood, African Blackwood fingerboard. 22 frets either 6230 or 6105 (Dunlop Sizes), 3 3 machinehead setup on the headstock. No inlay, side dots only. No binding. Rolled edges. Carbon Reinforced, DE truss rod. Graphite Nut. 25.5 scale, nut width roughly 2 inches (classical width)

Pickups: Direct mounted to the wood #1 '59 Neck (running to a series/parallel switch) and a Full Shred bridge. #2 Vintage P90 neck, Custom P90 bridge ... and #3 Pearly Gates Neck, Telecaster Hot Lead Stack STK-T2b in the middle flat (not on a diagonal) in the middle (that's right), and a Full Shred Bridge

Electronics: Standard 3 way maybe 2-3 DPDT switches if they're needed, one 500k CTS volume pot, 250k Tone pot (CTS) ... running to the jack

Hardware: Recessed TOM w/ string through like the Godin Setup, Sperzel locking tuners, Metal round top knobs, Schaller Strap locks ... everything black

Here's a pic of the prototype test body I fired up nearly 3 years ago (it's plywood) I'm in the process of building the first one albeit it's a bolt on using a Warmoth neck. I have newer picture but none on the computer sorry

I am working on mine ;

see pics

It´s an hollow strat body , forearm cut , tummy cut swamp-ash , squilted maple top
It has a set of SD seymour duncans in it , the gold floyd is ordered but not arrived yet

The paintjob will be ocean blue-green dye paint like paul reed smith

The fretboard is brazillian rosewood , the back will be flamed maple

The headstock is brazillian rosewoodJohnny

my dream guitar would be a 62 seafoam strat (or any early 60's seafoam strat) with a quack/fat balance knob. It would somehow either fatten the tone of the pickups or make them sound quackier.

Schecter C-1 Classic with a Mahogany neck.

Here are two of my dreams.

Gibson SG-Z:Travis Bean TB1000A