software

Has anyone tried it?

After hearing how it sounds in the neck i'd like to hear it in the bridge, BUT my EMG's are 60neck and 89 bridge so i can't just swap em like a regular set.

Im guessing it'd sound awesome. I think its a little muddy/overlybassy in the neck.

if your emg's have the quick connect then you can swap them quite simple and since no emg is specially designed for a specific position it's worth trying(ok,the 60 is mainly for neck use). I will try sometimes(all my emgs are quick connects) and tell you guys about it.

My 60 isn't bassy in the neck at all however, I do have it set fairly low.

It sounds very single coil-like to me so I dont' know how it would sound in the bridge if you like a nice solid strong humbucker type tone.

Hey Mephis would it be possible for you to record me a clip with the 89b/60n I've been thinking about getting a set of those.


Originally Posted by Loserchiefif your emg's have the quick connect then you can swap them quite simple

He has an 89 in the bridge....it uses more wires.

Sorry, I dont have anything except a teamspeak mic to do any kind of recording, and I might as well play unpluged if im going to do that.Anyway, Has anyone tried the emg-60 in the bridge? Have soundclips?


Originally Posted by screamingdaisyHe has an 89 in the bridge....it uses more wires.

not really newer 89s have the same quick connector(looked at it in my own guitar and emgs website says same thing)


Originally Posted by Loserchiefnot really newer 89s have the same quick connector(looked at it in my own guitar and emgs website says same thing)

I donno....looks different to me;

EMG 81/85/60/ect....
EMG 89what he means is that it gets wired for the dual mode function, the 89 that is. since the 60 is only a single function humbucker it wouldn't be wired up properly with the same wiring scheme as the 89.


Originally Posted by screamingdaisyI donno....looks different to me;

EMG 81/85/60/ect....
EMG 89

Josh Rand from Stone Sour uses two 60s in most of his guitars.