software

K guys, here's my rig right now . . . Guitar gt; Boss TU-2 (which also supplies power to the board) gt; Boss CS-3 Compressor gt; Fulltone Fulldrive 2

So, I may have some cash free up here . . . (like600-700 canadian) and am looking at upgrading my board. I'd like to add a better compressor, a Power centre, and maybe another distortion. What do you guys suggest?

Compressors:
Robert Keeley
Barber Tone Press

and for Distortions im looking at the Fulltone Distortion Pro, and for a power centre im looking at the Voodoo labs pedal power centre.

The only thing is, that my budget may not allow for all three, what would you say is a higher priority???? Compressors? OD's? Cleaner Power?

Any other suggestions of things to add\change?

Ty

Can't you sell your old Compressors and Ods and get the new ones? I don't think 2 compressors are needed anywhere.

bump

well ... comps aren't high on my list of quot;must havequot; effects, UNLESS you play a lot of slide, or country

also, I'm not convinced you'd be happier with a DP than the FDII


Originally Posted by GandLManK guys, here's my rig right now . . . Guitar gt; Boss TU-2 (which also supplies power to the board) gt; Boss CS-3 Compressor gt; Fulltone Fulldrive 2

So, I may have some cash free up here . . . (like600-700 canadian) and am looking at upgrading my board. I'd like to add a better compressor, a Power centre, and maybe another distortion. What do you guys suggest?

Compressors:
Robert Keeley
Barber Tone Press

and for Distortions im looking at the Fulltone Distortion Pro, and for a power centre im looking at the Voodoo labs pedal power centre.

The only thing is, that my budget may not allow for all three, what would you say is a higher priority???? Compressors? OD's? Cleaner Power?

Any other suggestions of things to add\change?

TyI don't know much about the pedals you are considering, but the power supply can be done for a lot less money.

I use 2 Amps: A Marshall 900, and a Fender Super Reverb. This created a lot of issues with effects. The Marshall has an effects loop and the Fender does not. In short what I wound up doing was building my own board.

I use a Ce2, DD3 and a TS9 in the Fender
I use a DOD TR3 thru the effects loop in the Marshal. I also have a Blusebreaker pedal plugged in the front end of the Marshall. This comes together at a Morley A/B box. Then my Wah and tuner. Everything is powered using a one spot (The TR3 is Ac powered, and the Wah has its own power supply). The One spot with the daisey chain I bought at Musicians Friend for $25. I wired everything with George L cables because they were easy to make at the desired length, and everything is dead quiet. Consider the One spot. For the money it is well worth it. I do not know wheather they will power the pedals you are considering, but for me it saved a few $ and it eliminated 5 wall worts.