software

Can anyone point me to a wiring diagram for 2 Humbuckers and a single coil with one tone and 2 volumes, one for bridge and one for neck, and a coil tap on bridge pup using a push/pull pot on first vol pot. Can that even be done?

Almost forgot. Thanks in advance to anyone who can help a brother out! This is my first post on this board.

Welcome aboard Blake.

That can be done very easily and I'm sure there is a schematic that is close to what you want. If I can't find one close enough I know there is someone around here that can draw one up pretty quick.

Just a question, but how are you going to control the volume of the middle pickup?

Yeah, see that's why I didn't know if it would work. Maybe it's best to just do one volume and two tones with the push/pull on the volume. Do you have that? (I'm doing this for someone else and he said either way would be alright.)

I couldn't find it all together, darn it. The first schematic shows how the guitar should be wired.

from : localhost//website...tone_5way.html

The second shows the push pull wiring. Follow the red/white wires from the bridge pickup to the switch. Run a wire to ground from the push pull and you're done.

from : localhost//website...way-w-spl.html

Simple stuff.

Thanks for the speedy delivery.

bumpage