software

Guys-
Started on my Febson or Ginder dream p90 platform and would appreciate a quick look at the following before I start wiring to see if I've got any shorts or other problems-
The first diagram is the p90 superswitch which feeds the 2nd superswitch
The second is the cool rail superswitch (which also defeats the p90s)
And the 3rd would be the controls (there is a 3rd pot that isn't shown for a spin a split)
Anybody see any problems?

Much thanks!

Bump-
Come on folks, Artie and Lew aren't the only ones out there who do custom wiring, are they?i've gone thru diagram 1: does the pu's have an extra ground wire?

MArcel, thanks for looking at this!
Thinking I'm going with SP90-1 vintage soapbar in the neck and SP90-2 hot
soapbar in the bridge which makes them 2 wire and ground- If that doesn't keep the hum away I will try the stacks-


Originally Posted by zionstratMArcel, thanks for looking at this!
Thinking I'm going with SP90-1 vintage soapbar in the neck and SP90-2 hot
soapbar in the bridge which makes them 2 wire and ground- If that doesn't keep the hum away I will try the stacks-

2 wire and ground ... then i can't see a problem in the first one ...

Thanks Marcel!
How about someone else looking over the cool rail?

Hey zion; I've downloaded these and will look them over at work tomorrow. I'll get back to you early tomorrow afternoon.

Artie