software

What do you guys think of some of the wiring possibilities out there...

Would you go quot;old schoolquot; with tone controls on the neck and middle, current Fender style, which is tone controls on the neck and middle/bridge, or would you prefer master tone with a blender pot?

I'm thinking of trying the blender pot arrangement for something different, as I have the current quot;stockquot; wiring now. I don't know, it might be nice to try the neck bridge, or all 3 pickups at the same time.

I like using a superswitch to get these combos:
1.bridge
2.bridge/middle
3.bridge/neck
4.middle/neck
5.neck

1st tone control for neck and 2nd tone for bridge. Position 3 sounds sweet.....middle positition Tele.
I'm sure more folks will chime in with their favorites.

My Strat is wired master volume/master tone.

My Strat is s/s/h but all the pickups are humbucking so I don't have noise or rw/rp issues. I added a series/parallel switch to the JB in the bridge and an on/off switch to the JB so I can combine it with the neck pickup or both the neck and middle pickup.

There are a few nice tone options in that guitar.


Originally Posted by Robert S.My Strat is wired master volume/master tone.

My Strat is s/s/h but all the pickups are humbucking so I don't have noise or rw/rp issues. I added a series/parallel switch to the JB in the bridge and an on/off switch to the JB so I can combine it with the neck pickup or both the neck and middle pickup.

There are a few nice tone options in that guitar.

@ Robert:

I once found out how to wire this with ONE switch.

I can describe this, if you are interested.