close
I want to build a footswitch for my amp's boost and channel switching. I have the TRS thing figured out but would seek wisdom on LEDs. Most of the ones I see at Rat Shack are either 2-2.5V or 12V units. Is that all that's commonly available? Like most amps, mine uses the 6V tap for the footswitch.
Should I run a 12V LED under voltage or would you suggest using resistors to drop the voltage to a 2V LED? Schems for this would be greatly appreciated!
Thanks
Not sure on the voltages you're needing to work with but Mouser has everything you'd ever need..
www.mouser.com
全站熱搜
留言列表
