software

Does anyone have a schematic to do this?

2 pickup standard tele. 4 way switch.

pos1. Neck (std tele)
pos2. Neck Bridge (std tele)
pos3. Bridge (std. Tele)
pos4. Bridge bypass tone pot (like esquire)

thanks in advance

I looked on the seymour duncan site (I'm sure you already did to) and didn't see anything. I also did a quick search on the web and didn't find anything. I thought esquires had ton pots.

Sorry I wasn't much (any) help

I see was just looking at the fender wed site at esquire and saw what you ment about bypassing the tone pot. I thought the selector swich on esquires was just used for coil tapping like on the seymour duncan esquire.

Good luck

I've been chewing on this for awhile, and so far, I don't see a way to do it. At least, not with a 4-way switch. The problem is, with two pickups, you need both sides of the switch for pup selection. There's no place left for anything else . . . like tone control selection.

I haven't given up yet . . . just don't see it.

Thanks anyhow. Yes its a tough one and I've searched high and low to figure it out. I'll keep at it or maybe pop in a push/pull pot to get that effect. we'll see.