software

Howdy. I've got this Fender Squier Bullet Special laying around yet to be worked on (new pickup, etc,) and I was just wondering if it would be possible to install an SD pickup booster into the body cavity underneath the pickguard? My pedalboard's becoming too big and the booster had to go, but I'd still like to use it. Who would I go to for this job? Would it be possible? What parts would I need? Can I change the footswitch operation to a three-way LP type on/off switch? How about the db knob, just turn into another knob on the guitar? and the fat switch into a mini switch?

Let me know because I'd seriously like to do this!

Chances are it won't fit. Sure, it can be done, but why? You'd limit yourself to it being used with that one guitar and no others. There's smaller circuits out there that can used as passive pickup preamps and/or boosters. Really tiny, low parts count, easy to build. Check out the Stratoblaster on from : localhost/www.generalguitargadgets.com/.

EMG Afterburner... push-pull knob with a variable gain

how abt install the mesa v-twin in it? no,you probably need an ES-335 for that.

did u open up the booster and see if the circuit board fit into the guitar cavity?


Originally Posted by pac112how abt install the mesa v-twin in it? no,you probably need an ES-335 for that....

Actually, I´ve seriously considered doing that to a Line 6 Variaxe

Check this out: from : localhost/guitarelectronics.zoovy.com/r...oosteramp;x=0amp;y=0

i'm pretty sure you can buy the 'guts' of the SD pickup booster for installation on the guitar
here: from : localhost/guitarelectronics.zoovy.com/product/PASFX