software

How do the arms stay in the different models of bridges that they sell?
Some look like they just push in, but there is nothing to hold them in/

there´s a teflon collar in the hole, and a small setscrew that adjusts the tension... very simple, but works like a charm


Originally Posted by Zerberusthere´s a teflon collar in the hole, and a small setscrew that adjusts the tension... very simple, but works like a charm

I have one just like that and another (vintage 6 hole) that just pushes in (no set screw).

The ones that just push in, is there anything that holds the arm in?

One of my friends had an Epiphone back in the late 80s with one of the cheaper Kahler trems, you could push the bar in the bridge, but you couldn't move around too much while playing, or the bar would fall out.

The VSVG (6 screw) slips in, but I could have sworn there was a teflon collar inside. I'll have to take a look.

The VS100s screw in like a fender vintage trem, only the female end is on the arm instead of in the block (at least mine is this way. I've seen pics of a VS100 with a set screw).

Anyone know where I can locate a VSVG trem arm? I need one.


Originally Posted by toneseekerThe ones that just push in, is there anything that holds the arm in? ...

There is a collar in there that holds it in nice and secure without it being 'floppy'. But I am only playing this guitar at work during lunch not on a stage where I might be a little more active.

Thanks.