software

I am setting my guitar up as H/S/H and I am looking for a wiring diagram. I know there is a SD one,( from : localhost//website..._tone_spl.html) but I want Hot Rails in the middle and the wiring diagram is for a normal single coil. I realize it will most likely be close or the same as a humbucker but I just don't know where to solder it to the switch. Can someone please help?

If you use that diagram, then on the Hot Rails, ground the green and bare wire, (instead of black), tie red and white together and tape them off, and connect black to the switch where the grayish wire goes now.

One other thing. With a Hot Rails, you may not want to split the other two humbuckers. (As that diagram shows.) If not, just don't connect those two red/white wires to the 5-way. Just connect them together, and tape them up. (Red and white of one pup together, red and white of the other pup together - not all together.)

Then again, it may sound fine. You'll just have to try it both ways.