software

this is a diagram of my guitar in its current wiring state, with the pup selection, bridge - bridge/neck - neck config. Please tell me if i have wired this wrong, including grounding and caps problems. Thanks

[IMG]Wiring Schematic[/IMG]

Hm, at the first look it might be right, but you forgot to ground the outer right connection of the Neck Volume pot, as you did it with the bridge Volume pot.

PS i think you should change the connections on the tone pot:
cap to right lug (not middle), hot jack to middle lug (not left)

Inge is correct. Except for what he noted, everything is fine. On the tone control, the cap on the middle lug is ok also, just swap the wires that you have on the one end lug to the other end. That will make the tone control be on quot;10quot; when its clockwise.

Cheers guys, your knowledge has proved invaluable once again!